Cadillac Owners Forum banner
1 - 7 of 7 Posts

· Registered
14 ats
Joined
·
94 Posts
Yes, here is why....

Here is your car:
Bolt pattern: 5 x 120mm
Offset Range: 34 - 45

Bolt pattern: 5 x 120mm
Offset Range: 35 - 50

Just make sure the offset is not above 45... I don't have the specs of the rims, but chances are very unlikely the offset is above 45... I actually was going to say NO, but I guess I was wrong I thought the bolt pattern was 5x115mm like my ATS was. Either way for future.
http://www.wheelsandspinners.com/

Just punch in your model on there, to search for rims, and at the top it will tell you what rim specs will fit your car.
 

· Registered
2013 XTS
Joined
·
51 Posts
In March 2013 i test fit 17" CTS wheels in an effort to get additional sidewall and an acceptable highway ride. The nuts & bolt pattern fit, but the rim was too small a diameter to clear balancing weights. The 17" rim was very very close to the caliper. An 18" would have likely fit, but never tried it.

----------

2010+ CTS (not CTS V which is 6 lug), XTS
5 x 120mm “High Positive Offset”
XTS Rim is Alloy, 19 x 8.5 / “JXIS39”

Buick Lacrosse, Lucerne, Park Ave, 1986-2009 Regal, Riviera; 2002-2009 DTS, CTS
5 x 115mm “High Positive Offset”
 

· Registered
2013 XTS Platinum
Joined
·
20 Posts
My 2013 Platinum came with 20's which I HATED cause the car rode poorly. I ended up buying some new CT6 19" take-offs from Ebay. Car rode better and the offset was the same. Wheels look very nice too. These cars should have come with 17's or 18's as half of the suspension dampening comes from the tires.

Wheel Tire White Automotive tire Green
 

· Registered
2013 XTS Platinum titanium white
Joined
·
175 Posts
I've thought about it a bit but my tires are like new and the dealer just paid to have my wheel redone. Maybe when I need new tires I might consider it. The wheels you now have look real nice.
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top