Cadillac Owners Forum banner
1 - 1 of 1 Posts

· Registered
70 Fleetwood, 87 and 90 Brougham, 94 Fleetwood
215 Posts
I have replaced many of these wheel bearings, mainly for ABS concerns.

Often, the axle spline will not go in all the way. Using the nut to pull the axle into the bearing and then applying proper torque, is an acceptable procedure.

1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.