Cadillac Owners Forum banner

view of strut mount assembly

1312 Views 3 Replies 2 Participants Last post by  Submariner409
Hello everyone,
last year I put new struts on my '99 eldo but not the mount or bearing, I bought a mount kit with bearings but I,m not sure I even put the originals back properly ! DUH! I've been searching for an exploded view every where I can think of. I have alldata, searched the threads, checked local library, checked online videos, obviously with no luck.
Would someone be so kind as to point me in the right direction? The squeak getting so bad the Eldo sounds like a
a 100 year old bedspring on wheels (and that's inside the car)! OK maybe not that bad but close..... thanks Ed
1 - 4 of 4 Posts
Try www.nalleygmc.com

Surf to your make, model, year, system, subsystem. Exploded drawings up the yingyang.
Sub, I tried that site nothing but new and used cars and anything you would ever want to know about anybody named nalley. I don't know if im using my alldatadiy to its full potential. I thought it showed whatever info you needed.

99 eldo base
Simple - You go to the NalleyGMC site, Cadillac, parts, model, year, and finally category selection - you get to a skrillion system and diagram choices for anything you want.

As for Alldata, you open your subscription - your particular car - and a drop down of all the systems opens on the left, a long list of references, DTCs, TSBs, RPOs, system descriptions, specifications, LOTS more on the right. Nothing will jump out at you - you need to look for it. Everything you see on those drop down menus is a link.

http://parts.nalleygmc.com/
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top