Cadillac Owners Forum banner

1 - 17 of 17 Posts

·
Registered
04 cts-v
Joined
·
189 Posts
Discussion Starter #1
Just to inform everyone, the underdrive pully that goes on the vette does work on our cars. It is a different belt but it does work. The car that has the pully on it, has a stereo and has no electircal drain whatsoever on this car. Chuck the owner of HPE, has this on his car, which should also add more power to our cars.

JET
 

·
Registered
04 cts-v
Joined
·
189 Posts
Discussion Starter #3
I would have to ask, but he has more mods and think they were all done at the same time. So maybe I will have to find out more info from him

Jet
 

·
Registered
'04V, '05V, '06SRT8, '10V, '13ZL1, '12 V, '16 Z06 SC757
Joined
·
6,440 Posts
These are usually a 5-7hp deal. I looked into these before. If a pulley and a belt are involved this may be a little costlier than I first thought. What do serpentine belts run anyway $50, $75? Aren't the pullies around $100? I've certainly spent more for less power gain. :lildevil:
 

·
Registered
Joined
·
187 Posts
Its not just a power improvement, the car also will rev up and down more quickly and respond more quickly because of the pullies. I put them on my 98 and 00 Trans Ams and loved that mod. I think I'm going to look into this. :)
 

·
Registered
Joined
·
651 Posts
I can't really say since I had it put on whenever they switched my smaller cam to the one that I have now. In my opinion every little bit helps, but I didn't do a before/after comparison.
 

·
Registered
Joined
·
651 Posts
It probably could be a DIY install, it was just convenient since they already had the balancer off, just decided to kill two birds with one stone. The pulleys are pretty high for the gain, probably around $300 or more.
 
1

·
Guest
Joined
·
0 Posts
yeah but a meziere electric water pump it about 700 bucks for 10 hp. the thing is it all adds up in the end lol
 

·
Registered
CTS-V
Joined
·
1,621 Posts
It sounds like a mod for the NA cars. For us Maggified owners, it might not be recommended. I wonder what effects it might have on our boost with an underdrive pulley?
 
1 - 17 of 17 Posts
Top