Cadillac Owners Forum banner

Shale Interior Plastic Paint

2822 Views 4 Replies 3 Participants Last post by  the cadillac man
Yes I did a search to see if I could find the answer but I couldn't seem to find what I was looking for. I know SEM products makes awesome leather paints and such but does anyone know the paint code, brand or anything to touch up the Shale colored plastic in our trucks? I have some spots that need touched up because the paint is peeling off for some reason. Has anyone did this and had good luck with a specific brand and a color I should be looking for and where to purchase the product. Thanks in advance!!
1 - 2 of 5 Posts
It's sem17203. GM 149b


Sent from AutoGuide.com Free App

----------

Any major auto paint supplier should carry it


Sent from AutoGuide.com Free App
That is the color match for the leather seats . I used this because I found it on an earlier post by someone else. It works incredibly . I did the front drivers set and passenger seat. U have to make sure that u clean the leather seats completely free of any dirt/oil. Make sure that you're treating the cuts in the leather and that will be shown by darkish coloring . Creases will not change but u can apply the paint to the whole seat if needed. I'll see if I can find the old post and instructions that I worked off of


Sent from AutoGuide.com Free App

----------

As u know the dash and other interior is the same color is the same in most. I did a search in this site of "paint seat" and in '09 the first post was all the info I needed . While I used it on my seats the console is the same color so I tested it and that as well and u cannot see where the original finish started and the touch up I did . Excellent help I received. So test it out for urself. I was ecstatic with the results . Do the search and u will see his post . I don't know how to put a link on here but I just did the search and Eureka! It popped right up


Sent from AutoGuide.com Free App
See less See more
1 - 2 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top