[GJB]

I'm looking for some help here. I need to replace the placard on the door Jam (long story). I'm looking for a photo or the info on the card for a MY 13/AWD/3.6 with 18" wheels. Any help here would be greatly appreciated.

 

[clempot911]

Re: Replacing tire and loading information placard

I believe that's #2 on this image:

Part Number: 19206430

Use that as a starting point, seems to be giving me the same p/n no matter what trim/engine I choose.

 

[Submariner409]

Re: Replacing tire and loading information placard

Those stickers are specific to YOUR vehicle's VIN and build data. Altering or replacing them with altered information is federal fraud. You might - might - be able to order an original replacement from a Cadillac dealer, but I doubt it. If the sticker is mutilated or missing the car might be tagged as a salvage unit. Ask the guys at Lindsay in Alexandria.

 

[GJB]

Re: Replacing tire and loading information placard

It is # 2 and yes they are all the same part # for every GM car I believe.. Door Jam was painted original was damaged. GM parts original was ordered by VIN but they all come blank and you write in the data in the fields with a pen and then it comes with a piece of lament to protect what you wrote and you place it where the original was/ I'm looking for the precise Original data that goes in there for my car. I know the passenger info I know the tire size/ PSI in lbs at least. I'm looking for the Max load and the metric measurements for a 2013/3.6/18"/AWD. I want to make sure all the data is identical info as the original.

 

[rsingl]

Re: Replacing tire and loading information placard

Maybe acquire an original from a wrecked/totaled ATS? I believe the salvage networks have a pretty sophisticated database network.

Alternatively if nobody here has your model then do a search for a used model with same content level in your area and take a photo of it.

 

[GJB]

Re: Replacing tire and loading information placard

Thanks, I'm sure someone here has the same model so I hope they post a picture or provide the Max load and TP data for both Metric/US.

 

[rfdude]

You mean this one? Mine is also 2013/AWD/3.6

 

[GJB]

Exactly what I was looking for! Thank you so much!

 

[rfdude]

No problem at all.

 

[ben.gators]

You mean this one? Mine is also 2013/AWD/3.6

Is it the VIN along the right edge? If its the VIN, then taking this card from a salvage car might not be a good idea because you will end up with mismatched VINs across your car.

GJB:

What happened to your car? I hope it was nothing serious!

 

[GJB]

Nothing serious at all, a while back when dealer was replacing my A/C evap to get rid of the musty smell the drivers door Jamb came back chipped pretty bad. I had them repair it (did a great job) but in the process solvent got on the sticker and smeared all the text. They ordered me a new one which comes blank and you use a pen to fill in the data and then a protective laminate goes over that. I thought that would look terrible so I want to try and see if I can fill in the identical original data with my VIN using a printer. Since my sticker is not legible I just needed to get the right info but use my Vin.