Cadillac Owners Forum banner
161 - 179 of 179 Posts

· Registered
2005 cts-v
Joined
·
108 Posts
I am told that these wheels were designed to work with stock arms. But I'm also at stock height I'm not lowered. Kw's or cam is my next adventure. I'd mostly like to have that extra clearance for my own piece of mind.
 

· Registered
Volant, VMAX, RX catch can, tranny cooler... RIP
Joined
·
518 Posts
BMR's and 285's? Awesome. I have been eye-balling the BMR trailing arms and RevShift trailing arm bushings for a minute now, and I was wondering how wide of tire I could fit in the rear. Might go 275, just to be safe, but this is encouraging.
 

· 2016 ATS Premium 6-spd MT
Joined
·
14,517 Posts
So are these arms still available to order?
Haven't seen much of killernoodle lately. His last post here was:

"Im currently wrapping up another project and am just about ready to redesign and start building these from scratch rather than requiring cores. I'll keep you guys posted."

That was on April 2, 2013. Left a lot of guys hanging, money in hand.
 

· Registered
2005 CTS-V --- the RED one :)
Joined
·
281 Posts
Discussion Starter · #174 ·
Yeah, I have a full time job, a house all to myself that needs work, and a V I literally just got back on the road. I'm a busy man and doing little pet projects isn't top priority, especially since they make me way less money than my normal 9-5 given the time invested. I still like doing little jobs like this, but at the moment I just don't have the free time.

You guys aren't the only ones, I've got people on other forums pestering me to make stuff for other machines and frankly I wish I could clone myself to do all the stuff I need to do.
 

· 2016 ATS Premium 6-spd MT
Joined
·
14,517 Posts
Yeah, I have a full time job, a house all to myself that needs work, and a V I literally just got back on the road. I'm a busy man and doing little pet projects isn't top priority, especially since they make me way less money than my normal 9-5 given the time invested. I still like doing little jobs like this, but at the moment I just don't have the free time.

You guys aren't the only ones, I've got people on other forums pestering me to make stuff for other machines and frankly I wish I could clone myself to do all the stuff I need to do.
Oops! Did I say, "totally unreliable?" I just knew that would smoke you out. Yeah ... that's the ticket.
 

· Registered
Joined
·
6 Posts
So as stated in the other thread here: Wide wheels rubbing your trailing arms? A solution! I'm going to be building these for forum members.

Prices include US shipping:

LEVEL .5 : $225 ($150 when core refunded) Sets In stock: 0
Stock arms with Ballistic Fabrication flex joint. No kink, fits stock wheels. Powder coated in your choice of: Black, Silver, White, Clear (natural metal color), or Burgundy

LEVEL 1 : $200 ($125 when core refunded) Sets In stock: 1
Stock arms with stock bushings. Mild kink in the arm for 19+" x 10" wide wheels to easily clear. Only the best cores I get will use this option as I want you guys to have good factory bushings. These might be limited in supply because I'm not going to sell arms with rotten bushings. Check with me before sending the paypal. Painted black rather than powder coated because I can't put the parts in an oven with the rubber bushings.

LEVEL 2: $350 ($275 when core refunded) Sets In Stock: 1
Stock arms with Ballistic Fabrication flex joints (beefy!!!). Mild kink in the arm for 19+" x 10" wide wheels to easily clear. Powder coated in your choice of: Black, Silver, White, Clear (natural metal color), or Burgundy (those are the powders I got :))

LEVEL 3: $TBA
Will be custom arms, for those wanting to run much wider wheels. I don't have anything wider than 10", so I have no idea yet how much it will take to make ridiculous wheels fit. If anyone has any other wheel sizes they are interested in fitting, let me know and I'll see if I can make it work. Right now, I think most people are just having problems with the Linea Corse wheels fitting.

CORE REFUND: $75 Sets In Stock: 0
Sell me your cores! I need these to keep this going. Even if you aren't buying arms.

If you are interested in a set, there will be a little queue here and status updates on how many cores I have, how many I need, and general progress reports. Keep in mind guys, I have a day job, a slow core supply chain, and a small shop. Order time will be lengthy, but you will get your parts.

First come, first served. Paypal to [email protected] with your forum handle, color request (for level 2) and whether or not you will have a core coming back. Please put this in the notes in paypal!!! It helps me keep track of who got theirs in the forum. No need to PM, my box will just become overrun. I'll update in this thread.

ORDER QUEUE
1. FuzzyLogic (thanks for all you've done man!) - Level 2
2. rand49er - Level 2
3.
Anyway to get some made now?
 
161 - 179 of 179 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top