[15ats]

iam now in a 16 ats coupe with the 3.6. as far as the cold air intakes they only show 13-15, the 16 for some reason is different. ( i now know why, the ats got the 3.6 from the ct6 for 2016 which increased the hp to 333) i did find this http://www.jacfab.net/Overkill-LFX-80mm-Throttle-Body-Kit_p_14.html and their intake. i also found this on summit racing https://www.summitracing.com/parts/jet-69180/overview/make/cadillac/model/ats will this jet flow sensor do anything at all???? I NOT LOOKING FOR INFO ON EXHAUST MODS THANKS! thanks for all your info in advance.

 

[15ats]

hum i got a responce back from jacfab on their 80mm tb for the 16 ats. only the frt half of the tb is 80mm and the back is 72mm which is stock. soooooo whats the point???? anyone???? thanks for your info.

 

[Phantom14]

Your best answer to that may come straight from the horses mouth at Overkill. I'd recommend emailing Will at [email protected] for clarification (if you haven't already).

Per the description as part of a suggested modpath on the Overkill website, "Overkill 80mm Throttle Body and JacFab Ported Intake Manifold - These go hand in hand together. The Overkill 80mm replaces the little 72mm factory throttle body. The ported manifold opens up the manifold inlet to 80mm and fills in a turbulent entrance cavity to improve flow. Together they add up to 20 wheel horsepower."

I've never heard anything good about any Jet products...or to put it another way, I've never seen that mod on anyone's 'to do' list, so I'm not sure what it would achieve. :hmm:

 

[Submariner409]

Different engine, different tune, but this (mechanically modified by) JET MAF did nothing but cost me a severe midrange stumble, loss of ~2 mpg, and lean mixture codes. A-B testing over 3,200 miles and one year. It's still on the shop shelf .............

 

[15ats]

cool thanks for your answers!