Cadillac Owners Forum banner

Lowering kit options with 26" wheels

14498 Views 25 Replies 9 Participants Last post by  allblackescalade08
Im narrowing down my choices for a set of 26" wheels on my 07 Escalade. After looking at pics of other vehicles online with larger wheels it looks like perhaps a 2" drop would compliment the finished look. I don't want to go too low and I want to maintain or improve handling if possible. In the past when Ive lowered a vehicle I have needed to replace the shocks so they are not bottomed out or kicking on any "Suspension error" lights. But I noticed some kits don't come with shocks, some come with sway bars, and the prices jump all over the place depending on what you buy. After spending over $4K on a wheel and tire package the last thing I want is to be wearing our tires due to alignment issues or suffer from poor handling. Any suggestions would be much appreciated.....
1 - 4 of 26 Posts
Land vehicle Vehicle Car Automotive tire Tire


I started off with a belltech 2/4 but it ended up lowering it more like 3/5ish. My wheel wells are 33" from ground. I dont think 26's would fit now but 24's would look good on mine. Im thinking i may go with the 24" replicas.
See less See more
  • Like
Reactions: 1
THe rear will sit lower after sitting over night. My air shock jsck up the rear 3/4-1" when i start it.
1 - 4 of 26 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top