just wanted to say hi to everyone!!!!!
1 - 2 of 2 Posts
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
Impossible misfire to solve
Northstar Engines and System Technical DiscussionHello! My car has a misfire on cylinders 7 and 3 mostly 7 it seems. The misfire completely goes away when I warm the car up to operating temperature. I’ve swapped injectors around, replaced spark plugs with denso double platinums, changed intake plenum boot and intake manifold gaskets, I sprayed...- 184
- 4K
-
Rough Engine
Northstar Engines and System Technical DiscussionHi. I have a 2000 DHS which will go from a smooth runner to running on a few cylinders in short distance especially if I attempt to gun it. I pulled the codes and the descriptions for the current codes are: -PCM P0300 engine misfire detected -PCM P1360 ignition coil group 2 control circuit...- 2
- 85
-
Northstar Swaps - What years are interchangeable and the differences
Northstar Engines and System Technical DiscussionNorthstar Interchangability 93/94 - These engines have the knock sensor below the fire-wall side cylinder head, screwed into the side of the engine block. These engines have slots cut into the intake ports to feed exhaust gas from the EGR system into the combustion chambers. Also, the intake...- 101
- 176K
-
Map sensor
Northstar Engines and System Technical DiscussionNow if the map sensor is bad is there a way to test it or just go out and get a new one? cause when you are driving it it will shut off and stall and sometimes in the morning when you go to start it it wont start it takes a while for it to start! like it will idle up and then down and up and...- 3
- 1K
-
4.6 northstar timing
Northstar Engines and System Technical DiscussionHi, I hate to ask this as im sure there are plenty of threads about it already!! If so a link would help alot!! I can't find any that explain it well enough! But I have the photos and know all about the timing marks, also understand that the cams have to be aligned not by the sprocket but by the...- 13
- 17K
-
demell · updated
Join now to ask and comment!