Cadillac Owners Forum banner

intercooler pump upgrade

2260 Views 8 Replies 2 Participants Last post by  Carlosg
Where can I get one and what are using. Give me a link.
1 - 4 of 9 Posts
You will need 2 NPT to hose fittings that you can get at Home Depot or Lowe's. You will also need to fabricate a bracket to hold as it is not a direct swap. I used the factory bracket and made another one to attach to the factory bracket. Not extremely difficult, but take a little time.
Yes there are only 2 wires.
You have to change the orientation of the outlet. There are a couple of screws in the top of the motor (NOT THE 3 ON TOP OF THE UNIT) you take out and move the outlet.
1 - 4 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.