[elwesso]

You should be able to just fix the hose........ Most likely you will need to cut the hose......

You will not be able to just wrap it up, since the the fuel pressure regulator maintains pressures in excess of 50psi.......

To fix it, you will need to take out the fuse to the fuel pump, and crank the engine a few times to release the fuel pressure, and then just replace the hose.......

Dont heed my words and start at it now, someone else will need to chime in and either correct me/confirm me.......

Also, Welcome to the forums!!!!

 

[elwesso]

Plastic is not good for fuel lines, except that it wont corrode........ I dont know if anyone makes metal lines, but i bet someone does...... Start googling!!!!

 

[elwesso]

It should just be called a fuel line......

 

[elwesso]

Or you can go to pepboys and get fuel injection hose..... More expensive, but it can handle up to 100psi..... And is probably just as good as OEM......