I have searched and read the old threads regarding the hoods from these guys. Anyone have some long term results to share? I am thinking of getting one this weekend. Do i get just the cowl, or the cowl and vents? Seems like the vents would suck all kinds of heat out of the engine especially with maggie packed in there. Also the local body shop i called estimated a minimum of $300-$400 to paint it. He said there have been times before when the fiberglass soaks up the paint after being baked and looks like the hood has been walked on, then the hood has to be re-sanded, bondo'd, re-sanded, and then repainted.
Key Points.....
-Vents or no vents?
-Long term results?
-Paint cost ok?
-Fiberglass soaking up the paint?
No experience with this hood, but with any paint the key is prep. If someone had the paint soak into the Fiberglass, it's becuase they did a halfass prep job.
What do you think about the vents? From the first picture it looks like they are set above the hood. If they were flush i think i would be all for them, but if they set above i think they look cheap. I could just add those to my current hood if i didnt want them flush. Doesnt pep boys sell some stick on ones?!!!
What do you think about the vents? From the first picture it looks like they are set above the hood. If they were flush i think i would be all for them, but if they set above i think they look cheap. I could just add those to my current hood if i didnt want them flush. Doesnt pep boys sell some stick on ones?!!!
rgd has a hood similiar to this one and and prettty sure he told me it was this hood.
If I remember correctly he had the vents and I Think they blended in nicely. The Venst did not look like an add on after it was prepped and painted. May want to PM him he could probably answer all of your questions. I'm sure he would be happy to send you some pic's of the hood also.
is that is user name? RGD? This is getting pricey... Now im thinking hood or UUC flywheel... Geez, I havent received my UUC shifter yet. Maybe i should take things 1 mod at a time....
is that is user name? RGD? This is getting pricey... Now im thinking hood or UUC flywheel... Geez, I havent received my UUC shifter yet. Maybe i should take things 1 mod at a time....
I was looking into this hood but I decided to get the Headers, GM Accessory Wheels, B&B Exhaust, UUC Shifter, UUC Knob, UUC Bushings...
I would like to get a heat extractor hood but I don't like having the vents open to the elements, I was hoping it would be a functional cowl but it is not. It gets pretty hot under the hood and it would be nice to pull out some of that heat.
I like the hood but after prep and paint and the cost of the hood it was going to be over 1K so I decided to go with the performance mods and some smaller body mods (Having the Sport Rear spoiler installed Today).
I was thinking about the UUC Flywheel But I haven't even installed the Headers yet! I am still thinking about buying it but still not sure....
Email i just got from Jimmy at Extreme Composites:"The vents bond in separate so they can be trimmed flush or left slightly elevated".
I would like the hood and have no doubt it would look bad ass, but it's hard to spend that much on "looks" knowing what performance mods you could get for that kind of money. Even with the great deal he is offering me, after paint i'm still going to be over $1k... Anyone want to buy my stock hood? I'm only asking $999.99 :thepan:
For the love of God did I hear stick ons? I hope that was a joke:thumbsup:
All that you heard regarding the paint and finish is true. Mine was block sanded 5 times and heat baked and then finished several times. Fiberglass, carbon fiber etc. are very, very, tricky and you will pay a minimum of $700.00 for the work that goes into it to do it right. I will have pictures of mine once it gets on in a week or two.
Extractors are the way to go especially if you you're maggied.
RGD know his stuff as well and can assist your quest.
Why a joke? Will stick on ones not remove heat from the engine? Was also getting the stickons for the fender so i can roll with Tiger Woods and the Buicks! haha Yea i was kidding. Thanks for the suggestions. I just need to find a post by rgd so i can PM him! $700 in labor???!!! I think i've got a few more performance mods to go before spending my moola on a hood.
Ok I want to start out saying I'm posting this because I hope it helps someone else thru the install/take out process that I just went through. I'm sure the day will come when you are out of warranty, and you need to replace your broken diff. I did this not knowing much of anything about it...
Need a little help here figuring out what this plug is for. It’s near the front driver side head lights. Lights are all plugged in so not really sure what it’s for. Any ideas.
I have an odd issue (a few actually). 2005 CTS-V prior salvage, front driver side impact. Cruise control works perfect with headlights OFF, but if they are ON the cruise will only work with the instrument light dimmer turned down to a hair above the lowest position. I have a feeling this might...
Can anyone help me with my window issue arose up sometimes but the rest always work I thought the driver side window should be the one or the command in window
I have an 2005 CTSV with a Maggie. I just replaced the engine. The engine is turning over but will not start, its getting fuel. The codes it is throwing are p0118, c0281, c0550. The temp is reading over 300 degrees, I pulled the plug off of the sensor and it still reads over 300 degrees. Maybe...
