Anyone interested in one before I cut it up and store it in my basement?
CTS-V Exhaust in Denver
Join the discussion
Recommended Reading
-
8.8 31 spline axles
2004-2007 Cadillac CTS-V Performance ModsAny body have any issues getting the CS Axles to seat? It seems like it can't make it past the retention ring. Is there a trick to getting it to seat? The stock axles seated easily- 3
- 746
-
branland · updated
-
STS V injectors.
2004-2007 Cadillac CTS-V Performance ModsIn my quest for a low buck injector solution I stumbled across the STS / XLR V injectors. They are LS6 length and EV6/USCAR connection. This is not a solution for most, but for those who are LS2 with a fast 92 intake it maybe a good solution for you. To use the FAST 92 intake successfully...- 3
- 421
-
-4 AN braided steel lines
2004-2007 Cadillac CTS-V Performance ModsDecided to update the hydraulics a bit and did a full -4 AN set up, from master to slave. The benifit being no lost force through rubber line expansion, similar to braided steel brake lines. The system will transfer over to a new master or slave whenever future maintenance is required. I'll be...- 3
- 484
-
Anyone use the GEN1V Bolt-in Diff brace?
2004-2007 Cadillac CTS-V Performance ModsHighly considering getting one of these braces after dealing with parade clunking/ rubber banding. Was wondering if anybody had any positive experiences with these or if anyone has an old one to sell.- 10
- 1K
-
Rev Shift Motor Mounts Install Writeup Tutorial
2004-2007 Cadillac CTS-V Performance ModsSo your stock motor mounts look like this? If they don't yet, they will. Time to change them out for some nice new Rev Shift Motor Mounts! (the Nylon Nuts on the RevShifts are 3/4"): Tools you'll need: 15mm socket 18mm socket 3/4" socket Jack with piece of wood to distribute weight...- 88
- 31K
-
lollygagger8 · updated
Join now to ask and comment!