Seems when I turn the steering, even when just standing still, both left and right turns seem like they clunk thru the turn as I am turning it, as if something is rubbing or in the way. It only clunks once thru the turn on each side as if it pushes thru something. From what I have read it seems like the steering rack but just want to confirm. Rims are stock. Any ideas on what this could be?
-
BEWARE OF SCAMMERS. Anyone trying to get your money should be checked out BEFORE you send anything anywhere.
markus3000
I'd second the sway bar end links.
My bushings had completely disintegrated and were just metal hanging there pretty much useless.
They should have rubber bushings in between the control arm (both sides) and in the sway bar (both sides).
Sent from my Pixel 2 XL using Tapatalk
My bushings had completely disintegrated and were just metal hanging there pretty much useless.
They should have rubber bushings in between the control arm (both sides) and in the sway bar (both sides).
Sent from my Pixel 2 XL using Tapatalk
x2 for swaybar end links AND upper control arm ball joins.
Granted swaybar end link failure is pretty common in GM cars... IDK why. We had a 2500 Suburban where the swaybar literally cracked in half, that was oddly amazing as you wouldn't consider that 1"+ solid bar as breakable.
And if you are wondering, this is 100% open road mommy mobile. No off-road stresses at all.
Granted swaybar end link failure is pretty common in GM cars... IDK why. We had a 2500 Suburban where the swaybar literally cracked in half, that was oddly amazing as you wouldn't consider that 1"+ solid bar as breakable.
And if you are wondering, this is 100% open road mommy mobile. No off-road stresses at all.
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
