Cadillac Owners Forum banner

Changing Rear Pads - Top caliper pin problem

1162 Views 11 Replies 5 Participants Last post by  Yaemish
I am in the middle of changing my rear pads and the top caliper pin won't slide (its not rotating easily at all). I can't get the caliper assembly down over the pads. I've never had this happen. How do I fix it?
1 - 1 of 12 Posts
No you don't have to remove 10, unless you need to remove the rotor. You do not have to remove 22 unless you need to remove the rotor, they have nothing to do with changing the pads.
Sounds like 10 is sticking and not allowing full rotation, my PA is the same way. I believe the drivers side I end up taking 10 out to install the pads, have to remove the ebrake cable clamp on the a arm to get it off also.
1 - 1 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.