Cadillac Owners Forum banner
  • Hey everyone! Enter your ride HERE to be a part of September's Ride of the Month Challenge!
1 - 3 of 3 Posts

·
Registered
Joined
·
1,185 Posts
joeyblaze said:
ttt

come on guys any part number, any answers on the EG tips?
Just replace the mufflers with some Magnaflows and leave everything else they way it is that will give you a nice sounds Pj had it like that previously. I have listed the part numbers many times for those mufflers do a search I am too busy to look them up.
 

·
Registered
Joined
·
1,185 Posts
AznPrydeRegalRyde said:
Well, the stock OEM exhuast out the mufflers is 2". All you have to do is find the diameter of the Magnaflow muffler outlet from thier website. If its 2", it will fit.

We're not really sure about how the V does on the 3.6. We DO know that the V will perform alot better on the 3.6 then the 3.2. That's definite. I just can't see the V exhuast performing well. If a 2.5" exhuast was good, Borla, Corsa and B&B would have made theirs that size.

I'm pretty sure you can get Magnaflow mufflers with 2" outlets, which means the E&G tips will fit.
I agree with you 100% and I have been preaching it it has been proven you actually gain about 4hp from putting the V exhaust on but I think if you look at the dyno number people have gotten you actually loose more than 10 pounds of torque which is the reason I think none of the exhaust companies chose to go with 2.5.
 

·
Registered
Joined
·
1,185 Posts
RobertCTS said:
This may be true but at this time it's just a swag, as I don't think anyone has done a before and after dyno with a V exhaust on a 3.6.:yup:
I think it is more than a swag we have people in the forum that pushed 190 pounds of torque with the V exhaust which is far less than stock torque that was 42 pounds than what I am pushing and headers dont give you 42 pounds of torque they only gave me like 30 more so it shows that you loose about 12 pounds of torque using the V exhaust which has always been common sense to me which is the reason none of the exhaust companies use 2.5" on the 3.6L
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top