Cadillac Owners Forum banner
  • Hey everyone! Enter your ride HERE to be a part of August's Ride of the Month Challenge!
1 - 2 of 2 Posts

·
Registered
2001 Eldorado 2008 DTS 2005 XLR 95 Eldo'11CTS-V,'66 corvair.'03 deville,'00 deville
Joined
·
2,350 Posts
Discussion Starter · #1 ·
It appears the accumulator will un- screw from its base flange. Is this the proper way to remove an accumulator, or do you have to get to the two lower flange bolts to remove?
 

·
Registered
2001 Eldorado 2008 DTS 2005 XLR 95 Eldo'11CTS-V,'66 corvair.'03 deville,'00 deville
Joined
·
2,350 Posts
Discussion Starter · #3 ·
I'm aware of the pressure issue, but my question maybe should be better explained. The base of the accumulator is an aluminum casting, held to the brake assy with two screws (that you can't see). But the can portion of the accumulator appears to thread (BIG threads) into the base casting.
Does the top portion (can) unscrew from the bottom (casting)?
These 'threads' are visible at the junction.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top