Cadillac Owners Forum banner

Borla Exhaust

Jump to Latest Follow

1 - 5 of 5 Posts
R

·
Registered
Joined
·
623 Posts
#2 •
Not to mention, I was just at my local Cadi dealer and was told that Corsa is out, and Borla is in, as the new factory authorized after mkt exhaust!
 
L

·
Registered
Joined
·
3,570 Posts
#5 •
Borla is a great exhaust system.

Too bad they are on like a 2-4 week backorder though...

A new player may be entering the market though... :canttalk:
 
1 - 5 of 5 Posts
Recommended Reading
Read More

  1. 8.8 31 spline axles

    2004-2007 Cadillac CTS-V Performance Mods
    Any body have any issues getting the CS Axles to seat? It seems like it can't make it past the retention ring. Is there a trick to getting it to seat? The stock axles seated easily

  2. STS V injectors.

    2004-2007 Cadillac CTS-V Performance Mods
    In my quest for a low buck injector solution I stumbled across the STS / XLR V injectors. They are LS6 length and EV6/USCAR connection. This is not a solution for most, but for those who are LS2 with a fast 92 intake it maybe a good solution for you. To use the FAST 92 intake successfully...

  3. -4 AN braided steel lines

    2004-2007 Cadillac CTS-V Performance Mods
    Decided to update the hydraulics a bit and did a full -4 AN set up, from master to slave. The benifit being no lost force through rubber line expansion, similar to braided steel brake lines. The system will transfer over to a new master or slave whenever future maintenance is required. I'll be...

  5. Anyone use the GEN1V Bolt-in Diff brace?

    2004-2007 Cadillac CTS-V Performance Mods
    Highly considering getting one of these braces after dealing with parade clunking/ rubber banding. Was wondering if anybody had any positive experiences with these or if anyone has an old one to sell.

  6. Rev Shift Motor Mounts Install Writeup Tutorial

    2004-2007 Cadillac CTS-V Performance Mods
    So your stock motor mounts look like this? If they don't yet, they will. Time to change them out for some nice new Rev Shift Motor Mounts! (the Nylon Nuts on the RevShifts are 3/4"): Tools you'll need: 15mm socket 18mm socket 3/4" socket Jack with piece of wood to distribute weight...
Read More
About this Discussion
4 Replies
5 Participants
Last post:
Luna.
Cadillac Owners Forum
Cadillac Forums is the perfect place to go to talk about your favorite Caddys including the ATS, CTS, SRX and Escalade.
Full Forum Listing
Explore Our Forums
Community Lounge, Introductions and General Discus Cadillac CTS First Generation Forum - 2003 - 2007 Cadillac Seville / Cadillac Eldorado Forum 2004-2007 Cadillac CTS-V General Discussion Cadillac DeVille 1985 to 2005 including:1985-1992
Popular Communities
Home Improvement
290,000+ members
Join
Home Entertainment
1,280,000+ members
Join
Top