Cadillac Owners Forum banner
1 - 3 of 3 Posts

· Registered
'02 ETC CE, '04 CTS-V, '04 XLR, '13 XTS Platinum
Joined
·
3,113 Posts
You might have more luck getting a response if you list the year / model / trim of your vehicle. Sexysrx doesn't give much to go on. . .

CCC
 

· Registered
2008 Cadillac SRX 4WD V6
Joined
·
5 Posts
My 2011 Cadillac SRX back up camera assembly has a GM part number 20910350. The camera has a 6-pin male connector that plugs into a 6-pin female connector on the wiring harness attached to the liftgate..

I am trying to corelate the wire colors on the camera assembly with the wire colors on the harness to ensure that all the signals connect to the right points in the car.

Below is a table that show what I have determined so far. Can someone tell me if the signal function match up with the right wire color and the pin # on the harness female connector?

FEM CONN (harness) Pin # CAMERA MALE CONN. SIGNAL FUNCTION
1 -Red Red Video+
4 -Blue Blue Video-
2 -Grey/bare White Shield
3 -Green Green Backup lamp
5 -Black white Black Gnd
6 -Purple or pink Pink Ignition

Thank you.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top