Cadillac Owners Forum banner
1 - 2 of 2 Posts

·
Registered
2012 Escalade, 2014 SRX
Joined
·
13,367 Posts
mikeee said:
Im a little bit confused as the Zaino site has several types of products that say they do the same thing. Well, this is what I want to do:
-- 100% clean surface to prepare for polish.
-- Swirl mark remover.
-- Polish
-- wax.
I have a black 2003 cadillac escalade. Problem is I have tons of swirl marks and fine scratches. Pretty much every panel on the car is several or one big swirl. I was goingto buy the kit but I didnt want to get anything I wont use. Also I dont want to use a buffer, Id like to do it by hand. Is it possoble to remove swirls by hand?
Mikeee, you can use scratch and swirl remover by hand, it is just a lot of work, you may want to take it to a good detail shop, or good body shop to have it buffed out, but if you don't mind a lot of work you can do it yourself, you may want to do panel by panel, or the whole truck. As far as Zaino products I would suggest Z-2, Z-5, Z-6, Z-7, Z-18 and ZFX, to that add Z-PC Scratch and Swirl Remover. Since you are going to use a Swirl Remover you can do without Z-18 Clay Bar. If you want the bare minimum get Z-5, Z-6, Z-7 (if you wash your truck yourself) ZFX and Z-PC (that is our Scratch & Swirl Remover) What state are you in?
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top