Cadillac Owners Forum banner

1 - 1 of 1 Posts

·
Registered
1996 seville
Joined
·
15 Posts
Discussion Starter #1
I just replaced all the brake lines and now I don't have any real pressure to the left front and left rear brakes. Right side is fine. Am i supposed to bleed the abs block? And also, I hope I'm correct- the top two ports on the abs block are the master cylinder feeds, the next two down are the rear brakes and the bottom two are the front brakes. Any help??? Thanks
 
1 - 1 of 1 Posts
Top