Cadillac Owners Forum banner

1 - 4 of 4 Posts

·
Registered
Cadillac
Joined
·
82 Posts
Discussion Starter #1
Ok I replaced the ignition module which tested bad and it still will not start. I am getting 13 volts to the distributor but it will not start. I'm gonna check tomorrow to see if there is spark. I was so ticked it didn't start I had to just walk away. While I'm cooling down, what else can I check? I'd appreciate any help.

jeremy
 

·
Super Moderator
2010 DTS
Joined
·
87,573 Posts
Ok I replaced the ignition module which tested bad and it still will not start. I am getting 13 volts to the distributor but it will not start. I'm gonna check tomorrow to see if there is spark. I was so ticked it didn't start I had to just walk away. While I'm cooling down, what else can I check? I'd appreciate any help.

jeremy
Fuel pressure.
 

·
Registered
Cadillac
Joined
·
82 Posts
Discussion Starter #4
Ok I still have no spark. I'm taking the module in to see if by chance it may be bad. No one will test a coil but the Chiltons book says "If the reading is infinite, replace the coil". I have no idea what infinite looks like on a digital meter. Any ideas? thanks
 
1 - 4 of 4 Posts
Top