Cadillac Owners Forum banner

2004 SRX 3.6l cranks, but won't start

1752 Views 7 Replies 5 Participants Last post by  Little j
I have an old SRX that has served me well with 230k miles on it. About a month ago, the car was running fine and my wife parked it in the driveway. Next day I went out to start it and it won't start. Battery is fine, gas feed is fine (checked with a fuel pressure gauge). When cranking the engine, it sounds like it wants to start, but just won't fire. It's been a while since I last changed the plugs (over 100k miles), and I happen to have new coil packs on hand, so I replaced all the spark plugs, coil packs, and for good measure, the fuel injectors. No luck. I then figure it might be the cam shaft positioning sensors, so I changed them also. It is throwing no codes, and no old codes are recorded. I searched the forum, but couldn't find anything specific that I haven't tried already. Anyone have thoughts on how to go about diagnosing the problem?
1 - 1 of 8 Posts
A 4.6 V8 engine mine doing the same thing any suggestions
Which make, model, year ? The 4.6 Northstar bears no resemblance to a 3.6.

Update your profile and we'll move this to the correct car/engine forum.
1 - 1 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.