Cadillac Owners Forum banner
  • Hey everyone! Enter your ride HERE to be a part of JULY's Ride of the Month Challenge!
sincere
1-19 of 353 Results
Advanced
  1. Escalade, EXT and ESV Forum - 1999-2006
    Would love to get it ....anyone have it?:rolleyes:
  2. RWD DeVille/Fleetwood, Brougham 19xx-1996
    Today I finally had the necessary supplies and time to get started with repairing the rust on my '86. I'll have lots more pictures and such when I actually make some progress, but right now I have a question. I've sanded off all the rust on the first repair spot, but the metal is still pitted...
  3. CTS First Generation Forum - 2003-2007
    ok after two nights of dremmeling and filing I got it pretty much exactly how I want it. The only thing I need now is a stronger mount inside but that will have to wait until tmrw when I can get up to the depot. What do you guys think? after I get it firmly mounted tmrw night, I'll get it...
  4. CTS First Generation Forum - 2003-2007
    hey guys, almost done everything i want to do to the car. installed my new grille, changed my interior to blue led's (much to the dismay of some people), just picked up my car from the tint shop, ordered my side markers, installed the HID's 8000k in my low beams and fog lights (which looks...
  5. 2009-2015 CTS-V General Discussion
    After about 3 weeks I'm finally done with my audio install. It talks awhile when your doing it all yourself. Love the satisfaction of doing all myself though. Build: Stripped the back end down and installed Dynamat. Replaced the stock Bose 3.25" speakers in the dash and package tray with...
  6. 2009-2015 CTS-V General Discussion
    Before car with headers and exhaust all rest stock, 490hp. @ 9 lbs boost stock No other change but putting on my ported blower base and snout with STOCK pulleys, 538hp. @ 6 lbs boost. I tried a few more configurations and made no changes to the flow or to the hp. So it stays where it is and...
  7. 2009-2015 CTS-V Performance Mods
    Well, finally got to a dyno today to see what the car can do. I was expecting a bit more power but I think there is some power left in more timing. I wanted to say thanks to Jesse for answering some questions. I know I bugged ya a bit today but I didn't want to hog up my friends dyno much...
  8. CTS First Generation Forum - 2003-2007
    Just finished my LED conversion. Changed the reading lights, the side door lights, the dome light, the under dash lights, the trunk light, license plate light, the triangle lights in the headlights. i got the lights for the bright light and the reverse lights. but those were my only 2 problems...
  9. CTS First Generation Forum - 2003-2007
    Here are the pictures of the finished install on my 06 cts. This is a pioneer avicz-110 with new door sperkers, new sub, new amps, and all new wiring. I also posted these in a thread labled aftermarket radio wiring help. The whole thing works with exception of the steering wheel knob and the...
  10. Escalade, EXT and ESV Forum - 1999-2006
    Hello all, I am making my list of final items I am attempting to get fixed on my 2006 EXT prior to the factory warranty expiring. Is there any secret warranties or advise any of you can give me? I know how bad these things are for front differentials, and i do hear a very slight howl on certain...
  11. STS Forum - 2005-2012
    2005-2007 To 2008-2010 STS Front bumper w/ E&G & HID FINISHED! But not finished. Help Here it is... put it on the car without them damn clips that are being made in Somalia by little asian sweatshop children. Its been 3 weeks, dealer called and said they would reorder them again. My cars been...
  12. FWD DeVille 1985-2005, Fleetwood, and 60 Special
    Victory! I just finished replacing the rack and pinion assembly because it was leaking like crazy out of both boots. I can't believe I did it in a day. It wasn't that bad, but if any of you guys need to do this to your post '00 devilles, or any northstar for that matter, REMOVE THE HEAT SHIELD...
  13. CTS First Generation Forum - 2003-2007
    INTERIOR 303 Spot Cleaner Tuff Stuff Cleaner Hot Towel & Soft Bristle Brush for removal Wet/Dry Shop Vac LeatheriqueRO&PC ENGINE TAW & 303 WHEELS/WELLS Craftsman LoJack P21S TAW P21S Wheel Gel BHB, Various brushes, Grout Sponge WASH Foam Gun/CGW&G Rinse 2BM/Megs GC Rinse CLAY Megs White ONR...
  14. Topics Under Review
    Well I finally finished the cradle(except for paint). I also found a useful way to use the extra poly. I should have the cradle back in the car and be able to start mocking up trailing arms by Thursday. Here are some pics of the cradle mounts and what I used the leftover poly on. If anyone...
  15. SRX 1st Generation Forum - 2004-2009
    It took alot of time, and alot of searching for parts, but I just finished the swap. Thanks to GMJim, and Lenny (can't remember username) for info about what parts I needed to use. Fitment was great, all the parts and paint matched up well. I didnt have to do any custom work, no cutting, no...
  16. 2004-2007 CTS-V General Discussion
    Filled in corvette, painted them glossy black.....simple, but it looks nice...originally I wanted 5.7l in red, but when I pulled the masking tape off some of the red came with....so all black it is, the 5.7l and lines still show up pretty nicely, just hard to tell in the photo.....enjoy...
  17. STS Forum - 2005-2012
    I have been tinkering with my car for months now. I finally have everything done for now. The subs are in, the wheels are finally on and I wanted to post some pics of the stereo for anyone interested. The equipment is Memphis, the subs and amp are brand new additions to their product line up...
  18. 2009-2015 CTS-V General Discussion
    Forum member "chris1268" has the honor of owning this fine automobile that was donated for r&d! Great car Chris. I took some video for anyone interested in somewhat hearing the sounds from my cheap audio camera.
  19. Northstar Engines and System Technical Discussion
    Some of you will understand. Some of you won`t. I`ve had about 5 people in a row that want to do nothing but complain about little minor things after an engine out head gasket job. 1. traction & abs codes of which I offered to try my best to remove 2. rough starting, that was present before I...
1-19 of 353 Results
Top