Cadillac Owners Forum banner
  • Hey everyone! Enter your ride HERE to be a part of September's Ride of the Month Challenge!
headers
1-20 of 500 Results
Advanced
  1. 2008-2013 CTS Performance Mods
    With tons of research I realize there's no one selling headers made to fit my CTS LLT, but I was sure that the Camaros would have tons of options. Turns out they did and I'm wondering if anyone's ever tried to fit them into their 3.6L CTS. I'd assume if they don't fit as is, I could do go to a...
  2. RWD DeVille/Fleetwood, Brougham 19xx-1996
    Hello, Newbie here, I did search the page before posting but seemed to strike out. Or just didn't look in the right spot so I apologize if discussed before. I have an LS swapped 88 brougham Miller Meteor hearse. Engine is out of an 02 Vette. 4L60E, stock nothing crazy. But just ordered a cam...
  3. 2004-2007 CTS-V Performance Mods
    Sorry, tried searching but it wasn't working at the time. What options are available for tuning. Do any companies offer a "canned" tune thats worth anything for these CTS-V's? Just picked one up, and all it has so far is a K&N intake, and Corsa exhaust.
  4. CTS First Generation Forum - 2003-2007
    http://www.summitracing.com/parts/JBA-1816SJT/?rtype=10 these are for the 2010 v-6 camaro which has the direct injection version of our 3.6L engine, same block and all. these headers "should" bolt up. anyone ever going to try it?
  5. 2004-2007 CTS-V Performance Mods
    I really need an exhaust upgrade and I've spent weeks watching every video on youtube, myspace, facebook, and streetfire at least a dozen times. I've changed my mind between stainless works, magnaflow, b&b, and corsa at least a dozen times also. I think I narrowed it down to the B&B. I need...
  6. 2009-2015 CTS-V General Discussion
    I was looking at a 2010 V on a dealer's lot a couple of days ago and I noticed that the aluminum door sills were marked "Cadillac" rather than with the "V" symbol. Is that right? I thought the V got special door sills.:confused: Can anybody confirm the door sills on the 2010 V?
  7. 2009-2015 CTS-V Appearance Mods
    Does anyone know if the optional polished aluminum wheels on the 2010 CTS-V are clear coated or are they just polished aluminum? I've cleaned the brake dust off mine but they don't seem to have the same punch as when I cleaned them initially. If they're just polished, I can probably use some...
  8. 2004-2007 CTS-V Performance Mods
    I'm leaning towards the LS7 clutch kit through Lindsay for my clutch replacement. Am I able to use any LS7 flywheel for my '04? If I'm not going to go with the Fidanza twin, I'd like to at least got with a light weight aluminum one. What are your thoughts?
  9. 2009-2015 CTS-V Performance Mods
    I think it would be appropriate to see most, if not all of the dyno information in one thread if possible. This could be a helpful database of information for V2 owners. My goal is to load up here and request a sticky for easy accessibility. So who's king of the hill? Please list the following...
  10. Seville and Eldorado Forum
    Any ideas on what motor this might be? Aluminum Block, Cast Iron Heads Casting Number 6G4352292 My friend just bought a Porsche with this motor in it. The former owner says its a Cadillac motor. Thanks (small block V8, looks like it might be a 4.1)
  11. 2008-2013 CTS General Discussion
    Does anyone have a method for removing fine scratches and marks from the brushed aluminum used on the console? I purchased a used 2008 CTS and I think the former owner used the area around the shifter for his keys and sunglasses. Thanks in advance for any help and I just want to let all of...
  12. 2009-2015 CTS-V General Discussion
    Just finished the install, I still need to put a few bolts through the gas pedal but more concerned about the brake being securely fastened. These are from SRP, just like Titaniumseeker. :worship: I don't mind the fastners showing. I'll let you know how I like the feel. Before After
  13. 2008-2013 CTS General Discussion
    I have the 18" polished Aluminum wheels. What is the best products to use to clean , polish, and preserve the finish on the wheels?
  14. 2004-2007 CTS-V Appearance Mods
    Seems like I remember products that included alumninum door locks and other interior aftermarket trim. I am looking specifically for a piece that would go around the shifter plate. My original is pretty beat and doesnt look too good. Any help is appreciated.
  15. 2004-2007 CTS-V General Discussion
    Does anyone have a good recommendation for trying to polish out a couple of minor scratches on the interior door trim. In particular, the door pull (not the one to open the door, the one to close it) has some visible scratches that i'd like to sand / polish out, but have never really worked...
  16. 2008-2013 CTS Performance Mods
    DOes abnybody know of a co making an aluminum two piece driveshaft for this car? My steel one feels out of balance and i'm either going to have it rebalanced...........or preferably find an aluminum one to replace it with...........thanks
  17. 2009-2015 CTS-V Appearance Mods
    Getting ready to Power Ball the wheels what are the stock wheels ?
  18. 2009-2015 CTS-V General Discussion
    wonder if this will work on our cars also? if so sound like an easy upgrade for 30 rwhp
  19. Seville and Eldorado Forum
    Does anyone know where I can get an all-aluminum radiator that fits one of these cars? I'm looking for an upgrade over my OEM.
  20. 2004-2007 CTS-V Appearance Mods
    I have a question I need help on as research and a call to Lindsay have been inconclusive. I just want to know if the GM Accessory wheels are polished aluminum or chrome plated. I need to know because I am looking to buy a set to powdercoat black and the cost varies depending. Let me know...
1-20 of 500 Results
Top