Cadillac Owners Forum banner
  • Hey everyone! Enter your ride HERE to be a part of JULY's Ride of the Month Challenge!
extremism
1-20 of 489 Results
Advanced
  1. CTS First Generation Forum - 2003-2007
    Ok so i have been doing research and I have decided against cutting stock springs. I will instead be getting actual lowering springs. Any one have any suggestions? I want to lower the car down a bit and also get bigger rims but im worried about rubbing. If i got one of these kits what size...
  2. STS Forum - 2005-2012
    After a week of ordering lowering springs from two different vendors, then being told they are not available, I've come to realize a few things; (correct me if I am wrong, please.) 1) There are 3 sets of lowering springs out for our car. a) A garbage set by intrax, which are not even worth...
  3. STS-V Series Forum - 2006-2009
    After a week of ordering lowering springs from two different vendors, then being told they are not available, I've come to realize a few things; (correct me if I am wrong, please.) 1) There are 3 sets of lowering springs out for our car. a) A garbage set by intrax, which are not even worth...
  4. STS Forum - 2005-2012
    Anyone have a good source to purchase lowering springs for the STS/STS-V? D3's price of $400 is kinda crazy. http://sixtomotorsports.com/ has them for $294, but I cannot get them to sell them to me. Ive tried to contact the dude for 4 days and pay for it, and I keep getting brushed off. Anyone...
  5. STS-V Series Forum - 2006-2009
    Anyone have a good source to purchase lowering springs for the STS/STS-V? D3's price of $400 is kinda crazy. http://sixtomotorsports.com/ has them for $294, but I cannot get them to sell them to me. Ive tried to contact the dude for 4 days and pay for it, and I keep getting brushed off. Anyone...
  6. STS Forum - 2005-2012
    Hello All, I ended up going with some Asanti AF134A's. 20", custom drilled to 20x8.5 and 20x10 in the rear - 6x115 bolt pattern with our correct offsets. I do have some questions however. Ive read nearly every thread on lowering springs on both of our forums. There is so much random info and...
  7. STS-V Series Forum - 2006-2009
    Hello All, I ended up going with some Asanti AF134A's. 20", custom drilled to 20x8.5 and 20x10 in the rear - 6x115 bolt pattern with our correct offsets. I do have some questions however. Ive read nearly every thread on lowering springs on both of our forums. There is so much random info and...
  8. Escalade, EXT and ESV Forum - 2007-2014
    I am new to the forum and to Escalades and have a quick question. I am putting on 26" wheels on an 07 Escalade and thinking about lowering it with a Ground Force kit. Will i need to do any cutting to accommodate the wheels or will it fit right in ? Also are there any other kits that are better...
  9. Escalade, EXT and ESV Forum - 2007-2014
    I wan to lower my 07 AWD Escalade. Now before I am jumped on I have serched but no definitive answers on 2wd vs awd. I would like a 3/5 I have 26"s on it. I know there are a lot of products out there I just want to hear opinions. Also can you do the spindles with AWD?
  10. 2008-2013 CTS Appearance Mods
    If you you've had some experience with any of the following, I would be greatly interested in your opinion of the various products. The Eibachs seems to get mixed reviews. I haven't heard too much on the H&R springs, but I'm afraid they will lower my vehicle a little too much for michigan...
  11. 2009-2015 CTS-V General Discussion
    Hello, As some of you may have seen some of the previous posts. There where a few vehicle owners had concerns in regards to deteriorated ride quality when installing the D3 lowering springs. Our team quickly set out to find a viable solution to increase the ride quality and performance with the...
  12. RWD DeVille/Fleetwood, Brougham 19xx-1996
    got an 1980 hearse i want to lower it. what is the best way ? parts? and the long shot question. dropped front solid Axel. would look so good but wo the work
  13. Escalade, EXT and ESV Forum - 1999-2006
    Does anyone have the stock parts left over from their lowering project that they would like to sell? We have a 03 ESV with a 2/3 McNaughty lowering kit and I would like to look into changing it back to stock ride height, well, my wife does mainly. I will also throw out there, if you live in...
  14. 2004-2007 CTS-V Performance Mods
    Hey everyone. Sometime this summer I'd like to lower my V, at least I think I'd like to lower my V. I'm a little leery of ruining ride comfort, but that's another issue. After hours of reading LOTS of different threads on lowering, I'm still left with a few questions. - I read in a number...
  15. 2004-2007 CTS-V Performance Mods
    Alright, What to do?? I hear that the H&R springs are on back order for 8 to 10 weeks People say the Eibach springs lower the car too much.. And the Ground control Coil Over kit doesnt lower the car enough.. What to do? Need advice, pictures etc.... ASAP!! Trying to pull the trigger today...
  16. STS-V Series Forum - 2006-2009
    I wanted to know if anyone has tried out the new springs that D3 sells (B&G Springs)? I had the intrax springs they sold in the past and it was terrible. My shocks were done in less than 2 weeks. Just want any feedback on the drop and ride of the new springs.
  17. 2009-2015 CTS-V General Discussion
    I want to lower my V but not sure wich way to go. I know D3 has been having some problems, but not too sure about them.
  18. Seville and Eldorado Forum
    Any spring options for the 89 Eldorado to lower it an inch or two? my ELC is working properly...just want to get rid of the wheel well gap.
  19. RWD DeVille/Fleetwood, Brougham 19xx-1996
    Would like to lower my mint 96 Fleetwood Brougham 3" including air leveling system. Seeking good engineering. Anyone done this?
  20. CTS First Generation Forum - 2003-2007
    Thought I would share this with the forum.. http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=270463174869&viewitem=&_trkparms=algo%3DLVI%26its%3DI%26otn%3D1&category=33582
1-20 of 489 Results
Top