Cadillac Owners Forum banner

dispatch

  1. Intake Manifold Torque Specs

    Cadillac DeVille 1985 to 2005 including:1985-1992
    Hey all! I need to know what the torque is for the intake manifold, we are changing the starter as we speak and my buddy wasnt sure what the torque was to put all this back on. I have the Haynes book on the way but im trying to get my baby started ASAP Thanks in advance folks. :cool2:
  2. Seatbelt bolt technical specs needed

    Informal Lounge, Introductions, General Discussion
    I'm trying to find out some specific information about GM seat belt bolts. Primarily the bolts used to mount the belt reels under the back seat. I think they are 12mm bolts. They take either a T47 or T50 torx bit, depending on the year. The same bolt is used for the upper reel mount in the...
  3. 3.6L bolt torque specs

    Cadillac CTS First Generation Forum - 2003 - 2007
    Does anyone have the bolt torque specs for the 3.6L 05 ? Thanks
  4. Cts strut tower brace torque specs

    Cadillac CTS First Generation Forum - 2003 - 2007
    I know this question has been asked many times before and answered as well , but searcherd the archives and can't find a definet answer. What are the torque specs for installing a oem strut tower brace on a 2007 3.6 Cts. I have seen 77,80,83,85 does anyone know the correct number?
  5. Brake caliper bracket torque specs?

    Cadillac Escalade, EXT and ESV Forum - 1999 - 2006
    I searched on here, but couldn't find the torque specs for the caliper mounting brackets for my '05. I did find the torque specs for the rear caliper guide pins, but not the fronts. Does anyone have those? I really need to get an FSM! :rant2:
  6. Motor Specs

    Cadillac STS-V Series Forum
    Two questions I can't seem to find any answers to right now without tearing about my own engine... Anyone have any ideas on dimensional specs for our engines? I mean very detailed drawings of the block and heads. Second, anyone have any evidence to support what our engines are capable of...
  7. 2007 CTS 3.6 oil change torque specs?

    Cadillac CTS First Generation Forum - 2003 - 2007
    Does anyone have the torque specs for the drain plug and oil filter cartridge on the 3.6 2007 CTS? Is the drain plug on the passenger side of the pan?
  8. Custom FE specs?

    Cadillac STS-V Series Forum
    I purchased my V new in May of 08. The front tires are shot, with only 9700 miles. These are easy miles, mostly in town. Car is my DD. Both tires have metal cord showing on the inside. I have no option but to run run flats. I'm going to try a Goodyear Excellence run flat, all the way...
  9. Fuel system specs?

    Cadillac Catera and Cimarron Forum
    Does any one know what the flow specs are on our stock injectors and stock fuel pump? Thanks! :cool:
  10. ECM specs, where do I find them?

    HT4100 4.1, 4.5, 4.9
    Ok, now that I've got the motor in the hole (with oil on top :duh:) where should I look for the ECM specs when running diagnostics on the car? For instance, I get a -.2 for my TPS; is it in spec or out? That is just one of the many things I would like to check, but you get the idea. Thanks...
  11. Bolt torque specs for all things to do heads, cam, intake, and balancer inside.

    2009-2015 Cadillac CTS-V Performance Mods
    Due to people asking me over and over, here they are in one spot so you guys can write them down. This is for the LSA and LS9 engine only. Camshaft retrainer bolts. "the cover that holds in the cam" 11lb ft. Rocker arm bolts 22-25 lb ft. "33lb ft if aftermarket" To do the rocker arm...
  12. CTS V Coupe Release Specs

    2009-2015 Cadillac CTS-V General Discussion
    I received specs and prices from GM for the CTS V Coupe. I responded to the solicitation of a Quote from the local dealer. He promptly responded with how the Dealership could "get me the Car I want" from their inventory. However, getting down to the specifics, they can't order new Cadillac's...
  13. intake gasket & torque specs please help

    Cadillac CTS First Generation Forum - 2003 - 2007
    ok ive called every auto part store i can think of and no one seems to have the intake manifold gasket by anychance does anyone know the part number for it and also the torque specs for the intake manifold.. any advise would help thanks..
  14. 2010 cts 3.0 specs

    2008-2013 Cadillac CTS General Discussion
    does anyone know what the rear end ratio is on the 3.0 engine? also, what are the transmission ratios for the automatic in the 3.0? jackg 06 sts6
  15. Where can I obtain details for Y43 - rotor dia.'s, caliper specs, # of pistons, etc?

    2008-2013 Cadillac CTS Performance Mods
    GM markets the Y43 option by just saying "Performance" or "Sport" as far as the upgrades. I was not able to determine what "Performance" or "Sport" gets me....all I know that's the best they have without buying a CTS-V. Where can I find comparative specs with the other options including the...
  16. Where can I obtain details for Y43 - rotor dia.'s, caliper specs, # of pistons, etc

    2008-2013 Cadillac CTS General Discussion
    GM markets the Y43 option by just saying "Performance" or "Sport" as far as the upgrades. I was not able to determine what "Performance" or "Sport" gets me....all I know that's the best they have without buying a CTS-V. Where can I find comparative specs with the other options including the...
  17. Oil Specs

    Cadillac Escalade, EXT and ESV Forum - 1999 - 2006
    Can someone point me into the direction of a discussion thread h ere with all the oil specs for a Caddy 2003 EXT Escalade (type and amounts)? Engine, Tranny, Diff, Transfercase Thanks
  18. Looking for a couple torque specs

    2004-2007 Cadillac CTS-V General Discussion
    I need the torque specs for the half shaft axle nut, and the rear spindle ball joints. thanks
  19. Custom Wheel Specs?

    Cadillac STS-V Series Forum
    I am planning on getting some custom wheels made fro the "V" . . . In my studies I have found this info on the stock wheels. Bolt Pattern: 6 x 115mm Front Wheel: 18" x 8.5" w/ a 51 mm offset Rear Wheel: 19" x 9.5" w/ a 56 mm offset Any recommended improvements? . . . . Toying with...
  20. 98 DeVille camshaft (cradle?) bolt torque specs needed !!!

    Cadillac DeVille 1985 to 2005 including:1985-1992
    First time user, Broke camshaft on 98 4.6L DeVille removing water pump drive belt pully:Anyway I got another but need the bolt torque specs to replace the broken one. I need torque specs or pounds per in.? for the bolts that hold down the cam. Many thanks in advance! Hope to finish today. JW
Top