I just installed a lockpick from CoastalEtech on my 2010 CTS. It came with no manual or instuctions what so ever. The installation part was no problem. I just went by the video on the CoastalEtech website. My question is with the DIP switch settings and how to set the auto/manual functions...

hi everyone i have a 96 deville and i need to replace the shift solenoids. i ordered the kit with both along with filter, harness and bolt. i have been trying to find the instructions on the procedure but can find it anywhere on the web so if anyone has an idea on where to find it let me know...

Hi Guys, In about 4 hours, there should be some new videos for how to do heads, cam, heat exchanger, lower pulley, rocker arms, ect... It is a walk thru of everything needed, including most torque specs. ect... Wait4meperformance should pull them all up.

I did not get any instructions with the pulley or heat exchanger. I was curious to know what all needs to be removed to do each of them. Are you guys taking out the radiator and fans to do the pulley? Are you taking off the bumper to do the heat exchanger?

I have a 1989 Eldorado with Twilight Sentinel. The car sat for quite a while before I took ownership and the headlight switches seem to have been affected by not being used. My dash lights will go dim and then bright very quickly and erratically. Also, the computer display (which shows the...

I hop in a 2010 Escalade with an Ipod touch with movies and videos on it, can anyone tell me how and what I need to be able to play them on the nav screen using the "supposedly super cool" USB port? So far any dealer i have been to is clueless. Just plugging my Ipod Touch into the USB port...

I have a 2000 eldorado with the bose system and i needed instructions on how to replace the hu i have already replaced the back speakers and i no that i will need to replace the front ones as well but i have heard alot of stories about cars not starting and i dont need that happening to me so if...

Anyone have the original, B&M shifter install instructions? I will follow the shifter from the top thread, but I think I'm still possibly missing parts or at least confused as to what I have. If you have them my email is [email protected], im trying the install this morning Thanks Mark

Want to remove my center console and need the instructions. Does anyone have access to the service manual be so kind to post the instructions? Thanks in advance!!

hello I searched but i didnt find how to install the nav into my 99 sts. the harness i alredy have. i need to know where i have to put the vehicle speed sensor into. maybe there is a thread with pic s and instructions? didnt find it thx

Hey everyone, I am getting a Used Driveshaft with 6400 miles on it, from 2006 V (for my 2004 V) Could anyone send me some instructions on removal and installation? I am interested in basic cautions, or tips to make my life easier. Torq Specs... Lock Tight or not? I belive I have to remove the...

I've searched and can't find good, step-by-step directions on how to do this to a 99 Seville. I know there are pinch bolts at the top and bottom, if I manage to get them out (the rubber boot is going to be a headache) how do I get the shaft out? Does it come out under the dash or out the...

I've just purchased an 06 STS. It didn't come with a NAV DVD and the dealer ordered a new one for me that should be arriving in another few days. Can anyone tell me if the firmware updates are on that disk? Also, are there any tricks/traps I should be aware of before loading the disk? I...

Anyone have an issue with their nav system not providing voice instructions during guidance to a destination? The weird part is it won't give me voice instructions for any preset destination except "Home". Also, I don't get voice instructions when I get directions downloaded from OnStar. I do...

Hello! I am a new member. Love my new 2009 Cadillac STS which I have had for three months. When I first got the car, the navigation data - turn information etc - showed in the HUD. Now it doesn't anymore. Does anyone know if there is a switch that turns this on and off, or should I take it to...

Just wanting to do this on my own, but I'm not sure how to look it up on this web site. Please help. Mike

I've searched for over an hour and am finding nothing. Can anyone point me to a good set of installation instructions for the B&M and or UUC. I will be getting one just want the install instructions. Antoher person said I could find them here. I couldn't pictures always help!