V6: 3.0, 3.2 LA3, 3.6 LY7, 3.6 DI LLT Discussion, Supercharger for 3.6 cts in Cadillac Engine Discussion; Is there's supercharger for the 3.6 cts? If so where can I get 1????...
- 03-31-13 04:41 PM #1Cadillac Owners Member
- Automobile(s): 2008 cts
- Join Date
- Feb 2013
Supercharger for 3.6 cts
Is there's supercharger for the 3.6 cts? If so where can I get 1????
- 05-14-13 05:19 PM #2Cadillac Owners Member
- Automobile(s): 2005 CTS
- Join Date
- May 2013
Let me know if u get an answer. I have a 05 CTS with the 3.6 liter
- 06-11-13 03:11 PM #3
Re: Supercharger for 3.6 cts
No. Not a top-mount one at least. I believe RX Performance has a front mount, pro-charger type unit set up for the LLT... but everything should bolt up the same to the LY7.
RX also makes a twin turbo set-up for the LFX Camaro that could probably be made to work with the LY7 with a little work.
There are turbo kits for the CTS-V that mount the turbos in the back, in place of the mufflers, and pipe everything up front to the intake, all you would have to do is change the intake end so it mates your engine up front (and install a CTS-V exhaust, which you should do anyways). And probably use smaller turbos... these kits are made for a six liter V8!
You will need, or should heavily consider, MACE Engineering cams and connecting rods, and RX Performance pistons. These parts have all been redesigned to be stronger to handle boost. The LY7 is built like a tank, but when you start cramming 20+psi into it, anything not designed for that is bound to fail.
+ Reply to Thread
Gear in this thread - Powered by O'Reilly Auto Parts
- PowerTorque Tools - Flare Nut Wrench Set
Flare Nut Wrench Set - 3 Piece; Metric; Includes: 10mm X 11mm, 12mm X 13mm & 15mm X 17mm
- PowerTorque Tools - SAE & Metric Socket Set
SAE & Metric Socket Set - 50 Piece; 3/8 Inch Drive
- PowerTorque Tools - Universal Joint Set
Universal Joint Set - 3 Piece; 1/4 Inch, 3/8 Inch, 1/2 Inch