Suspension, Brakes and Tires Discussion, service ride control display in Item Specific Cadillac Discussion; # 1 05-03-06, 08:29 PM des vbmenu_register("postmenu_686876", true); junior member Join Date: Apr 2004 Location: calgary Age: 56 Posts: 4 ...
- 05-04-06 12:01 AM #1Cadillac Owners Member
- Automobile(s): 2002 deville
- Join Date
- Apr 2004
service ride control display#1
05-03-06, 08:29 PM
des vbmenu_register("postmenu_686876", true);
Join Date: Apr 2004
Ownership: 94 deville
Service Ride Control Display
I have installed new passive struts on my 94 cadillac deville, the car runs great but I now need to get rid of the Service Riide Control on my display. I recieved the relay and resistors but instructions are poor.It tells locate wire 370 connected to the control module in the trunk, under the front trim panel.
Which one is it ? I cannot find wire 370 . It also tells me to run a wire from switched ignition[ hot in run ] source, can someone also help me to locate. Also I have the two resistors to be connected to the old electronic stuts by cutting the wires and splice in the resistor, well I have three wires going to each strut. Please Help
+ Reply to Thread
Gear in this thread - Powered by O'Reilly Auto Parts
- PowerTorque Tools - Extension Set
Extension Set - 3/8 Inch Drive; 3 Piece; Includes 3 Inch, 6 Inch, 10 Inch
- PowerTorque Tools - SAE Hex Bits Set
SAE Hex Bits Set - 7 Piece; 3/8" Drive; SAE Hex Bits; Contains: 1/8", 5/32", 3/16", 7/32", 1/4", 5/16" & 3/8"
- PowerTorque Tools - Ratchet Wrench Set
Ratchet Wrench Set - 7 Piece; Metric