Suspension, Brakes and Tires Discussion, I`m Lowering My Etc Right Now!!!..... in Item Specific Cadillac Discussion; .....and I am having one problem. Repositioning the rear level ride looks somewhat difficult (the drilling angles on the shock ...
- 04-09-06 03:41 PM #1Cadillac Owners Member
- Join Date
- Apr 2006
I`m Lowering My Etc Right Now!!!.....
.....and I am having one problem. Repositioning the rear level ride looks somewhat difficult (the drilling angles on the shock tower). Has anyone lowered a `99 Eldo ETC or similar car ? I`m using Eibachs and they never included their diagram. I will call them but was wondering if anyone out there just simply bent the level sensor rod to an appropriate length. Can anyone help ??? Thanks, I am a new message board poster.
- 04-16-06 08:50 PM #2
Re: I`m Lowering My Etc Right Now!!!.....
Search around the boards, it's been done a few times before, some people installed the springs, then took it to a shop to have the ride hight sensor repositioned. It's pretty simple as I recall, just have to drill a couple of new holes for the sensor on the tower.
+ Reply to Thread
Gear in this thread - Powered by O'Reilly Auto Parts
- PowerTorque Tools - Flex Handle
Flex Handle - 1/2"Dr Flex HandleMore on PowerTorque Tools - Flex Handle
- PowerTorque Tools - Screwdriver Set
Screwdriver Set - 8 Piece
- PowerTorque Tools - Stubby Hex Bits Socket Set
Stubby Hex Bits Socket Set - 9 Piece; 1/4" & 3/8" Drive; Metric Stubby Hex Bit Socket Set; Contains: 1/4" Drive: 6mm, 7mm, 8mm & 10mm, 3/8" Drive: 12mm, 14mm, 17mm, 18mm & 19mm