Suspension, Brakes and Tires Discussion, 6" linkage rod on suspension sensor, p/n needed in Item Specific Cadillac Discussion; Help, I have a 97 Seville STS with two broken linkage rods. These rods have female coupler ends that snap ...
- 12-13-03 06:40 PM #1Cadillac Owners Member
- Join Date
- Dec 2003
6" linkage rod on suspension sensor, p/n needed
Help, I have a 97 Seville STS with two broken linkage rods. These rods have female coupler ends that snap over balls located on a sensor and on a lower arm of the suspension. They measure apprx 6" from end to end.
These exist at all 4 wheels, but only the front 2 rods are broken (plastic couplers have deteriorated).
Can anyone supply me with a p/n so I can run these parts down? Much thanks!
+ Reply to Thread
Gear in this thread - Powered by O'Reilly Auto Parts
- PowerTorque Tools - SAE & Metric Socket Set
SAE & Metric Socket Set - 19 Piece; 3/8" Drive; Ratchet Handle Set
- PowerTorque Tools - Stubby Hex Bits Socket Set
Stubby Hex Bits Socket Set - 9 Piece; 1/4" & 3/8" Drive; SAE Stubby Hex Bit Socket Set; Contains: 1/4" Drive: 1/4", 5/16" & 3/8", 3/8" Drive: 7/16", 1/2", 9/16", 5/8", 11/16" & 3/4"
- PowerTorque Tools - Metric Hex Bits Set
Metric Hex Bits Set - 7 Piece; 3/8" Drive; Metric; Metric Hex Bits; Contains: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm & 10mm