Thanks for posting.
Thanks for posting.
These flank style bulbs work great in the under door puddle light position, glove box, and license plate. V-LEDs Part number 194_6F_W_6K
I used these direct bulbs in the map lights (front and back) and under the dash in the footwells. V-LEDs Part number 194_HP_W_6K
I've used this particular bulb for three plus years on my previous car without any failures.
I'm obviously a total Klutz if I injured myself following your video on the map lights! I need to see how to do it before I can even THINK about trying it myself.
Mike (just pulled a muscle typing)
Can you describe to me/show me how to do the trunk and recommend where to get the LEDs?
Mike (will wear a cup while doing modifications)
Any length you want. I"m going to use 12", you just pull out the stock light housing in the trunk, and there is a red and black wire. You strip the red and black wire back, and wrap the red and black from the LED strip around the red and black strip from the factory harness. Pretty easy. Or you can get T-taps, and just press them onto the corresponding factory wiring. If you don't want to cut your factory wiring (no one will EVERRR see this), you can buy a light specifically for the socket that converts to an LED strip, but i'm going to have to do some searching to see what size festoon bulb the trunk is.
Looking forward to the further information and some pics/videos!
Mike (will try this one also)
And just plug it in. Should work.
I am going to attempt the 13 bulb mod tomorrow Captain.....do you know of anyone that has done the in-dash accent lighting at all? The newer CTSs (10-12) have white ambient lights that run along the dash and doors, along with an illuminated kick plate in the doors.......
Thanks in advance-
- ^^^ - Note that the posts from Captain are over a year old now, and I don't remember seeing him post at all on this forum recently. He may have moved to the, "other", forum ... ?
I did the footwell ones yesterday. I had to take off the driver side panel, the bulb would not come out (three screws). The passenger side came out easy.
Will continue the other ones next week - probably license plate is next.
Forgive me. I have been searching this VLED's website and I can't seem to find V-LEDs Part number 194_6F_W_6K. I have searched everywhere
I would like to change out my license plate bulb. Any help would be appreciated. TIA