If I had the space, I'd take the motor (even the 200 hp 500 still had 400something ft/lbs of torque). My basement is so full of car parts (I stockpile parts for all 3 of my vehicles) and random stuff that I can barely walk through it, which means I don't have room for an engine.
I'd have to get 2 buddies for that.....my arms are shot from having to remove and carry 4 (complete) brougham doors through the yard, into my van. BTW, I think I know how to do stage 4 weight reduction....just remove the doors.Originally Posted by j2rossit
I definitely need rear fillers for the tail lights. And front fillers behind turn signals. ThanksOriginally Posted by 1980coupe
A buddy is parting a '75 Sedan deVille w ith only 42,000 miles if anything is needed.
Looking for a 94-96 Cadillac Fleetwood/FWB right rear Chrome panel!!!
Help, my her ribs is showin :'(
I may have that. I'll check for you today.
It would be greatly appreciated if you found one. Its rare to find used fleetwood here in jax, florida.
Junkyards are total busts everytime I go :/ I'm also looking for center caps as well...even one would be great!
It's been sitting for years and he just picked it up to Derby it,Sorry.
AHHHHHH!!!!! Poor caddyOriginally Posted by CdnCaddi
Not necessarily a Cadillac part, but something I do need is a rearend for my project, as I remain convinced that the only ones that exist in this state are the 7.5" Sedan rears or Silverado rearends that would never work.
I need one that can bolt to my '87 Brougham, so quite possibly a 90-96 D or B Body rear (8.5") but there are other cars these can come from. I will need them with higher ratios, preferably 3.08, 3.23, 3.42 or 3.73.
This is really getting ridiculous.