Finally Been Done Cadillac Obd-2 N* Pcm Programmer!!! - Page 4

CadillacSTS2003 · #46 (**permalink**) 09-13-06, 04:50 PM

now is my rep restored?
so i have creditability now?
it really pissed me off to have everyone doubt ME when im one of the leaders looking for a PCM tuner for this car...

dkozloski · #47 (**permalink**) 09-13-06, 04:59 PM

Now we're getting somewhere. The thing appears to be made by JetChip. Now all we need to know is what's inside. JetChip has a lot of that kind of stuff on their site but I don't see anything for NorthStars. It's all for pushrod motors in Escalades and CTS-V's.

eldorado1 · #48 (**permalink**) 09-13-06, 05:04 PM

I'll give you $20 to take it apart. Anybody else want to pitch in?

If there's just a resistor in there, I will laugh my a$$ off

dkozloski · #49 (**permalink**) 09-13-06, 05:09 PM

The date on it appears to be 5/24/00. I wonder why the world isn't saturated with them by now. I supose first it has to work.

dkozloski · #50 (**permalink**) 09-13-06, 05:48 PM

Quote:

Originally Posted by CadillacETC1997

now is my rep restored?
so i have creditability now?
it really pissed me off to have everyone doubt ME when im one of the leaders looking for a PCM tuner for this car...

I don't think you're lying to us but I think there is a pretty good chance that whoever you're dealing with is less than forthright. Respect is something a young guy like you has to earn. Before us old guys are ready to take everything you say at face value, first you have to have a track record. For now your track record appears to be you being led down the garden path. We're all going to learn something together. Let's hope it's something good and then we'll all be happy. Until then we can all be polite and listen to each other as we hash it out.

AlBundy · #51 (**permalink**) 09-13-06, 06:06 PM

Quote:

Originally Posted by CadillacETC1997

prob cuz my mail was full with audio help questions oh well i got 900 for it on ebay

on a side not you can all bow down and kiss my ass now i went to the dealer on my way home removed it and snapped some shots you can note the PROTOTYPE on the sticker

I never doubted you.

I'm glad were finally getting somewhere with this. Now you need to find someone who might know how to duplicate the program.

clarkz71 · #52 (**permalink**) 09-13-06, 07:27 PM

Why is the date on that 5/24/00?

dkozloski · #53 (**permalink**) 09-13-06, 07:56 PM

Quote:

Originally Posted by clarkz71

Why is the date on that 5/24/00?

Because it was made 6 years ago. Because it says prototype on it, it's probably the only one.

CadillacSTS2003 · #54 (**permalink**) 09-13-06, 09:38 PM

i contacted jet chips on it
read the thing
its a prototype as of 5/24/00
they never produced it
they were working with XMS to make them but due to lack of interest the project was shut down.
how many times do i have to say this?
i even spoke with the owner of jet chips
his words were that it was designed and built as a prototype for testing by xms racing to work on their supercharger project. it was stage one of a several stage project into hacking the N* pcm. The project was shut down due to lack of interest.

dkozloski · #55 (**permalink**) 09-13-06, 11:07 PM

This thing looks like a device to offset the data between the sensors and the PCM like the fuel cut cheater I had on my old Mazda RX-7 turbo. Is it programable by you or is it WYSIWYG?

CadillacSTS2003 · #56 (**permalink**) 09-13-06, 11:16 PM

idk what WYSI.. is
but no its not programable
its like a chip it runs inline and adjusts things

GreenMachine · #57 (**permalink**) 09-13-06, 11:17 PM

so far I stand corrected, if this car was my own and I knew I had a steady flow of income I would in a heartbeat help get the party started on this thing. If that link is correct it makes a FWD eldo go as quick as the new STS RWD northstar, very impressive.

As others have said though, you could get gains like those from freer louder exhuast and such.

I think I read someone on this forum bought and programmed thier own piggyback computer which basically lies to the PCM about inputs, that in its self I think is the route to go and if I remember was much cheaper than 900. I wonder if they decided to produce it how much they would ask.

Being out of warranty for several years now on my 98 deville I would have no problem putting a mod like this on it if known to be stable and such.

CadillacSTS2003 · #58 (**permalink**) 09-13-06, 11:24 PM

again its the only one
idk how to make more and i wont have my 900 peice of equipment ripped apart to see if we CAN make more
its mine all mine and i love it she has so much more ballz i cant begin to describe
and most off i deserve it cuz unlike everyone here who complained about wanting hp im the one who emailed many companies searched day in and out and finally found this.
as far as im concerend everyone who doubted me and accused me of all people of lieing should have no business talking and telling me what i should or shouldnt do with my chip.
in my book me eldo1 and mark99sts are the only ones who should have access to shuch a toy because we are the major ones who actually try to provide this forum with help and more performance options for our cars.

dkozloski · #59 (**permalink**) 09-14-06, 12:09 AM

What You See Is What You Get.

GreenMachine · #60 (**permalink**) 09-14-06, 10:48 AM

im my post was I was refering to "this car" I was refering to my fathers 98 deville, not your eldo, after re-reading my post I can see how it sounds like I was telling to you what to do.

How much were you considering a charge to "barrow it" for a download? I live up in the Buffalo NY area Cheswick is near pitsburg if I recall, and do you know if its able to be used on other northstar equipped vehicles? That is of course after we can get some dino/time slip results.

And to Eldo, has your TB post been moved/deleted? I can't seem to find it, was wondering your prices and such, I was debating to at least remove and polish it myself since it would be hard to have much if any downtime on my (well fathers, soon to my mine

) vehicle.

Thanks.