Random Misfire P0300 code

[Ranger]

Not positive, but I would say no. Timing is electronic so there is no distributor to reference off of.

[RICOMRD]

Well, today I finished the project and found what the P0300 was and corrected it. I re-timed the cams. Checked the cam timing and re-checked it again. Put her back together and problem was solved.

I thank all of you who lent their helping hand with information and advice. Now I can enjoy my caddy again. Oh yes before I forget, for those of you who are playing with the thought of doing their head gaskets without dropping the cradle; word of advice: Don’t do it, or it will be an unforgettable and painful experience Yikes!!!

[RickyHenry]

what was the method you used to properly time the cams? I think i have the same timing issue after my head gasket job. rough idle, code 300, etc.