Cadillac
 

Cadillac Forums | Help Us Help You | Advertise | Cadillac Parts | Cadillac News | Cadillac Classifieds

Cadillac Technical Archive | Cadillac Dealers | Cadillac Reviews | Cadillac Dealer Reviews | Cadillac Vendors

Results 1 to 12 of 12

Thread: oil cooler

  1. #1
    Harry Yarnell is offline Cadillac Owners Enthusiast
    Automobile(s): 2005 XLR, '96 eldo,'95 eldo,' 89 eldo,'78 eldo,'11CTS-V
    Join Date
    Dec 2004
    Location
    perryman, MD
    Age
    73
    Posts
    881

    oil cooler

    I'm swapping out a '93 Northstar (the one with the 12mm inserts) with another '93. The first motor had engine oil cooler lines to the radiator; the second did not. Was the engine oil cooler a late production change?


  2. Remove Advertisements
    CadillacForums.com
    Advertisements
     

  3. #2
    Submariner409's Avatar
    Submariner409 is offline If it won't run, chrome it
    Automobile(s): 2002.5 F55 STS - 67,500 miles, 2014 Explorer XLT FWD
    Join Date
    Feb 2006
    Location
    MD Eastern Shore, Kent Island
    Age
    77
    Posts
    56,839

    Re: oil cooler

    ........for '93 ??? This is out of my year group, but......does the '93 take 7.5 quarts of oil for a complete change ? If so, the earlier N*'s used oil not only for lubrication, but also for cooling in the valve cover area and the large lower block/main bearing areas. If you have the opportunity to install an OEM or similar cooler setup, it can only add to the engine life and reliability. (My '57 Jag took 16 (16) quarts of oil, and the cooling system was a joke.)

  4. #3
    AJxtcman's Avatar
    AJxtcman is offline Cadillac Owners Connoisseur
    Automobile(s): The Northstar Tuner
    Join Date
    Apr 2007
    Location
    Rock Hill SC
    Age
    48
    Posts
    2,755

    Re: oil cooler

    93 would be VIN 9 vs Y.
    other years you need HD cooling.
    ETC most years had the oil coolers. 00+ It may have been another option.

  5. #4
    Mountie's Avatar
    Mountie is offline Cadillac Owners Enthusiast
    Automobile(s): '93 STS (sold), now looking for a CTS Wagon soon!!
    Join Date
    Jul 2005
    Location
    Bradenton, Fl
    Age
    62
    Posts
    502

    Re: oil cooler

    Quote Originally Posted by Harry Yarnell View Post
    I'm swapping out a '93 Northstar (the one with the 12mm inserts) with another '93. The first motor had engine oil cooler lines to the radiator; the second did not. Was the engine oil cooler a late production change?
    I put in another North* in my '93STS - same year engine - also had cooler line fittings. The oil cooler lines come out of the oil filter housing, turn to the right front corner & around to the cooler behind the grille.

    Watch for chaffing!!!!!!!!!

    I new, the stock cooler was way too small, so I replaced it with the same brand but twice as 'fat'. It used the same mounting holes.

    The first time putting in oil, it took 9.5 qts.!! After that, almost 8 qts.

  6. #5
    ktm is offline Cadillac Owners Member
    Automobile(s): Cadillac
    Join Date
    Sep 2006
    Posts
    7

    Re: oil cooler

    Is there any secret to removing the oil cooler? I bent mine (in my "totaled" but driveable '95 ETC) and it's leaking. Seems all I was doing was bending it while trying to loosen the fittings, and there's nothing above the fittings to grab on to. Thanks!

  7. #6
    Mountie's Avatar
    Mountie is offline Cadillac Owners Enthusiast
    Automobile(s): '93 STS (sold), now looking for a CTS Wagon soon!!
    Join Date
    Jul 2005
    Location
    Bradenton, Fl
    Age
    62
    Posts
    502

    Re: oil cooler

    It's just undoing the fittings with a couple wrenches. You may have to hold one fitting while undoing the other. It should be as simple as that.

    Make sure everything is nice and clean. Make it snug, ..don't over tighten?

  8. #7
    Mark C's Avatar
    Mark C is offline Cadillac Owners Connoisseur
    Automobile(s): 1997 Seville STS, 2000 Seville STS
    Join Date
    Jul 2007
    Age
    59
    Posts
    1,693

    Re: oil cooler

    I just got a 98 engine from an STS to put in my white 97 STS. The 98 is a VIN 9 LD9 engine (by the VIN and other markings on the rear pad on the block) but it didn't have provisions for an oil cooler, the 97 did. I just swapped the oil filter adapter from the 97 engine onto the 98 and I should be good to go.

  9. #8
    ktm is offline Cadillac Owners Member
    Automobile(s): Cadillac
    Join Date
    Sep 2006
    Posts
    7

    Re: oil cooler

    Thanks, but...what I meant was there is no other place that I could see to place a second wrench to hold it while trying to loosen the fitting.

  10. #9
    ktm is offline Cadillac Owners Member
    Automobile(s): Cadillac
    Join Date
    Sep 2006
    Posts
    7

    Re: oil cooler

    Here's a pic from another thread of the cooler in question. Thanks again...

    http://www.cadillacforums.com/forums...1&d=1178683910

  11. #10
    Mountie's Avatar
    Mountie is offline Cadillac Owners Enthusiast
    Automobile(s): '93 STS (sold), now looking for a CTS Wagon soon!!
    Join Date
    Jul 2005
    Location
    Bradenton, Fl
    Age
    62
    Posts
    502

    Re: oil cooler

    Quote Originally Posted by ktm View Post
    Here's a pic from another thread of the cooler in question. Thanks again...

    http://www.cadillacforums.com/forums...1&d=1178683910
    Same as mine ( I thought it was the oil lines you can't remove?)

    I still believe you have to use a wrench, but maybe someone else has the answer. The oil lines have a plastic seal fitting, into the cooler, that you are supposed to loosen?

  12. #11
    tateos's Avatar
    tateos is offline Cadillac Owners Connoisseur
    Automobile(s): 1997 ETC (GAVE TO STEPSON 2011), 2000 DTS (RIP)
    Join Date
    Jul 2007
    Location
    FOUNTAIN HILLS, AZ
    Age
    60
    Posts
    1,702

    Re: oil cooler

    Quote Originally Posted by ktm View Post
    Here's a pic from another thread of the cooler in question. Thanks again...

    http://www.cadillacforums.com/forums...1&d=1178683910
    That's cool! My '97 ETC does not have that external oil cooler - in my car, my radiator has the trans cooler on the driver's side tank, and the engine oil cooler on the passenger side tank. I also have the PS cooler on the drivers side, in front of the AC condenser. I added an additional, external trans cooler, and guess where I put it? Right where your engine oil cooler is!

  13. #12
    Mark C's Avatar
    Mark C is offline Cadillac Owners Connoisseur
    Automobile(s): 1997 Seville STS, 2000 Seville STS
    Join Date
    Jul 2007
    Age
    59
    Posts
    1,693

    Re: oil cooler

    I don't think you need a tool to take those connectors apart, just grab the two plastic tabs that are sticking out of the threaded fitting and press them tight against the hose and the hose should pull right out of the threaded fitting with a little wiggling.


Bookmarks

Cadillac Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Read about Lincoln | Buick | Kia Forte Forum