Northstar Engines and System Technical Discussion Discussion, Need Technical Help for Engine swaping... in Cadillac Engine Discussion; :disappoin I'm looking to buy a Northstar out of a 1994 Deville and put it in a 1994 STS. What ...
- 12-11-03 04:28 PM #1Cadillac Owners Member
- Join Date
- Dec 2003
Need Technical Help for Engine swaping...
:disappoin I'm looking to buy a Northstar out of a 1994 Deville and put it in a 1994 STS. What parts will I need to swap from my old engine to the one I'm getting from the salvage yard. I saw something about the cams being the only thing that is different on the two engines...is that true? The Deville is a Vin Y and my STS is a Vin 9. I'm hoping it's do-able since I found this engine for $700 and everywhere else I've looked they are at least 2 grand.
- 12-11-03 09:55 PM #2Cadillac Owners Member
- Join Date
- Oct 2003
- Richmond Va.
Re: Need Technical Help for Engine swaping...Originally Posted by surftool64
I,ve done this swap with customers cars and have had no compaints or problems so far.. the vin#9 motors seem to be alot harder to find in salvage yards and when you do they usually cost alot more ..
+ Reply to Thread
Gear in this thread - Powered by O'Reilly Auto Parts
- PowerTorque Tools - Universal Joint Set
Universal Joint Set - 3 Piece; 1/4 Inch, 3/8 Inch, 1/2 Inch
- PowerTorque Tools - Long Arm Hex Key SAE
Long Arm Hex Key SAE - 13 Pcs SAE Long Arm Hex Key Set; With Storage Container
- PowerTorque Tools - Long Reach Pliers
Long Reach Pliers - 11" 90 Degree Long Reach Pliers