Northstar Engines and System Technical Discussion Discussion, Problems with starting the engine in Cadillac Engine Discussion; hello!!! I am a german Cadillac fan.I ride a 1998 Cadillac STS in very good conditions. The engine rides with ...
- 07-03-09 11:14 AM #1Cadillac Owners Member
- Automobile(s): Cadillac
- Join Date
- Feb 2008
Problems with starting the engine
I am a german Cadillac fan.I ride a 1998 Cadillac STS in very good conditions.
The engine rides with LPG Gas,so here is my Problem.
The engine started with Fuel and when it is warm enough,he switsches to LPG.
When i stard my car,i have to start a long time and the engine dident start.
At my second try, i start the engine started after 5 or 8 secons and smells like a lot of Fuel.
Please can me anybody help with my start problem??
My car has about 70thousend Miles
sorry for my bad english
Alex from germany
- 07-03-09 04:55 PM #2
Re: Problems with starting the engine
English not a problem. Remove the cover over the engine and find the Fuel Pressure Regulator (FPR) which is inserted in the rear driver's end of the fuel injector connector rail. Start the car and remove the vacuum line which is attached to the nipple on the FPR. If there is any fuel present in the nipple then you must replace the FPR (if it has failed it will cause a very rich fuel mixture). The FPR is retained by a hairpin clip, and uses 2 O-rings for seals. Very simple replacement. www.rockauto.com or Luke, in Parts at Lindsay Cadillac, M-F, 9-5 EDT (+4 GMT), over there >>>>>
Otherwise, I do not know about the procedure for change from gasoline to LPG.
+ Reply to Thread
Gear in this thread - Powered by O'Reilly Auto Parts
- PowerTorque Tools - Long Reach Pliers
Long Reach Pliers - 11" Straight Long Reach Pliers
- PowerTorque Tools - Crowfoot Wrenches
Crowfoot Wrenches - 9 Pcs 3/8" Dr Crowfoot Wrench Set - Metric
- PowerTorque Tools - Long Arm Hex Key SAE
Long Arm Hex Key SAE - 13 Pcs SAE Long Arm Hex Key Set; With Storage Container