Northstar Engines and System Technical Discussion Discussion, EVAP Purge Solenoid in Cadillac Engine Technical Discussion; My SES light is illuminated and giving me DTC P0443. This gives me the following DTC:
EVAP Purge Solenoid Valve ...
My SES light is illuminated and giving me DTC P0443. This gives me the following DTC:
EVAP Purge Solenoid Valve 1 Control Circuit
Now my question is..... where exactly is the "Purge Solenoid" located? Is it the same thing as the "Evaporative Emissions Canister Purge Solenoid" on top of the N*? I notice the DTC also says "Valve 1 Control Circuit". Is this all within the same unit? To be honest I've spent hours searching and still do not have a clear idea of exactly what part to replace to get rid of this problem! If anyone has knowledge in this area please post up..... I'm pullin my hair out over here!
Ok so I'm guessing the picture below is of the EVAP Purge Solenoid, correct? Now would replacing this correct my P0443 code? Or is there something I'm missing? The whole "Valve 1 Control Circuit" part of the code has me thinking twice. Anyone???
If this is the culprit, I looked into the replacement part at RockAuto and it has 2 seperate ones. Would it be ACDELCO Part # 214646, or ACDELCO Part # 2141363??? I have the 2000 DTS.
Well today I dug into the project and when removing the Evap Solenoid to clean it I noticed one of the two wires had seperated. Since a new connector was $35 I repaied my broken one and it got rid of the SES light and the P0443 code..... FINALLY!!! Now onto fix the EBTCM......