Northstar Engines and System Technical Discussion Discussion, duramax1980 in Cadillac Engine Discussion; Help! I have an 01' STS. I have had the car since new and in the last two weeks I ...
- 04-21-09 06:54 PM #1Cadillac Owners Member
- Automobile(s): 2001 Seville STS
- Join Date
- Apr 2009
Help! I have an 01' STS. I have had the car since new and in the last two weeks I have been getting a number of codes. Also the Service Stability System comes on whenever and I will be driving when the DIC reads Stability System Engaged and it will momentarily pull to one side or the other. Is that a Steering wheel position sensor? Here are all the current codes: C1246, PO386, PO410, PO420, PO463, PO741, P1860. What are the other codes and the remedy? Thanks!
- 04-21-09 07:19 PM #2Cadillac Owners Connoisseur
- Automobile(s): '98 STS (RIP @ 206,xxx miles)
- Join Date
- Sep 2003
- Metro ATL
Your C1246 code is the only code that might even remotely apply to a SERVICE STABILTY SYSTEM message. And no, it is not the steering wheel position sensor.
C1246 - Brake Lining Wear Circuit Open
With this code present, you should also have a CHANGE BRAKE PADS message. Has there been recent brake work done on the car?
The remainder of your codes are all "P" (Powertrain) codes. I would clear all codes and do a short test drive to see which codes are set again.
- 04-21-09 07:21 PM #3
Decipher codes here. http://myweb.accessus.net/~090/dtcobd2.html
+ Reply to Thread
Gear in this thread - Powered by O'Reilly Auto Parts
- PowerTorque Tools - Stubby Hex Bits Socket Set
Stubby Hex Bits Socket Set - 9 Piece; 1/4" & 3/8" Drive; SAE Stubby Hex Bit Socket Set; Contains: 1/4" Drive: 1/4", 5/16" & 3/8", 3/8" Drive: 7/16", 1/2", 9/16", 5/8", 11/16" & 3/4"
- PowerTorque Tools - Ratchet Wrench Set
Ratchet Wrench Set - 7 Piece; Metric
- PowerTorque Tools - SAE & Metric Socket Set
SAE & Metric Socket Set - 50 Piece; 3/8 Inch Drive