Northstar Engines and System Technical Discussion Discussion, How Do I Change the ignition switch in Cadillac Engine Discussion; I have a 99 Deville, and just lately, after I replaced the wires and a couple of the coils, the ...
- 06-01-08 07:16 PM #1Cadillac Owners Fanatic
- Automobile(s): 02 Deville, 99 deville - both Adriatic Blue
- Join Date
- Jun 2004
- Miami Florida
How Do I Change the ignition switch
I have a 99 Deville, and just lately, after I replaced the wires and a couple of the coils, the car will not start. Thinking it was the starter, I replaced it, nothing changed. I cleaned the battery connections-nothing. There is not so much as a click. The dash lights up, the radio works, the battery is reading 12.5-13 volts, I had the battery load tested, still no luck. I tried jumpstarting it-no click or anything. What else could it be? I'm thinking that maybe its the ignition switch. IWill I have to get a new key if I get a new ignition switch? Have you guys had anything like this?
- 06-01-08 07:30 PM #2
Re: How Do I Change the ignition switch
One more thing, I have the code SDM 1327, which makes me think the battery, but would have jump starting addressed that problem?
+ Reply to Thread
Gear in this thread - Powered by O'Reilly Auto Parts
- PowerTorque Tools - Long Arm Hex Key SAE
Long Arm Hex Key SAE - 13 Pcs SAE Long Arm Hex Key Set; With Storage Container
- PowerTorque Tools - SAE & Metric Socket Set
SAE & Metric Socket Set - 19 Piece; 1/4" Drive
- PowerTorque Tools - Crowfoot Wrenches
Crowfoot Wrenches - 9 Pcs 3/8" Dr Crowfoot Wrench Set - Metric