This engine is in excellent condition, it was removed from my wife’s car.
I pulled both heads and had them pressure checked and surfaced.
I put Time-serts in all the head bolt holes and used new bolts and head gaskets.
I remove the bottom of the engine and time-serted the main bearing holes
I installed a new oil manifold, rear main seal and front main seal.
The block was re-assembled using the GM Sealant called out by the Cadillac dealer.
The injectors were removed and cleaned.
I installed a new idle control module.
I installed a new oil pressure switch.
I installed a new water temp sensor.
everything torque down to manufacture specs.
New spark plugs will be installed before shipping.