Need help finding part# for ballast connector

mrozado · #1 (**permalink**) 10-25-05, 09:35 AM

If any can help me ..... it will be very much appreciated.

I need your help to determine the part # on the harness/ connector that feeds the 12V into the ballast. I just need the black connector and the wires that plugs into the ballast, connector on the bottom left in the picture below. I tried the dealer that posted the pic...but was told it wasn't sold seperately. If anyone has a used harness with the connector..let me know how much.

Thanks,

mrozado · #2 (**permalink**) 11-01-05, 01:31 AM

Anyone?

tripowerbird · #3 (**permalink**) 11-02-05, 09:12 PM

You need to get a hold of a GM Weatherpak Connector catalog. It should be in there.

Chris

mrozado · #4 (**permalink**) 02-23-06, 02:34 AM

Does anyone have an extra cable connector they are looking to sell?

DaveSmed · #5 (**permalink**) 02-23-06, 05:14 PM

I dont supose you could get a detailed shot of the connector head on? From that pic, it looks like a standard two pin weather pack with the round pins (whatever number that is...). Go to a junkyard and look in the engine bays of a few later model GM vehicles. I can tell you one that might be it off the top of my head, the connector for a FWD Deville's oxygen sensor. There's probably a bunch of others.