• FAQ/DIY/How-To/Common Questions
• we are looking for someone who wants to do a Whipple
• Lightweight flywheel question
• Cheap Sways!
• Magnaflow Issues
• Twin supercharger.. old news?
• Supercharger Motivation
• See as most everyone has one Ill ask......
• Z06 Sway Link & Collar Install / Rotor Install
• who would buy a rearend replacement .8.8 or 9
• Cheap, brand new FG2's
• Which Redline Transmission Fluid?
• Axle installer FAIL!
• Straight Axle conversion option!
• Flip Drive Belt System for Maggies
• 800 HP Tranny options?
• Reliable Net Merchants?
• Motor mount dilemma
• Methanol Injection
• CEL points to low signal at MAF sensor
• Just got B&B exhaust --- a bit confused!!
• Creative Steel/Ultra Mounts Transmission Mount Full Review
• Got Some Test Pipes to Replace Stock Cats
• Monster Clutch Co. Holiday sale
• Cleaning out garage
• Nitrous purge location
• Cts-v 2006 automatic conversion
• Need a favor
• Brakes stock vs aftermarket for DD
• what does LINDSAY CADILLAC sell?
• Anyone have a corsa exhaust system for a 07? used/new
• Gforce Engineering axle kit ordering
• HELP, were is the speed sensor located ?
• LS7 Clutch Kit Ordered..To Remote Bleed or Not to Remote Bleed?
• X pipe ??
• Goodridge vs UUC Brake lines?
• My V finally feels like a true "Sports" sedan
• Specter Werkes Cradle Bushings
• Full motormount removale & install
• Accessory power location
• Does anyone make a remote bleeder for the CTS-V salve???
• Is this old news?
• Eibach Spring Part # Question
• New trans mount (wow!)
• Installed a DMH electric cutout
• Ebay Rotors & EBC Yellows = AWESOME
• New exhaust front to back
• Got the K dubs installed today
• All I ever wanted to know about CAM's and a few other questions
• Clutch Help
• Air Filter Part Number (cone filter - aftermarket)
• Spec Clutch
• LS6 Intake Part Number
• Anyone install a resonator on a Magnaflow exhaust?
• New BMR Pinion Support
• Textralia exo-skell install help!!!
• Other than stock shifter bushing with Katech shifter?
• Official Differential Bushing Puller Loan-A-Tool Signup.
• I got it on last night.....The Maggie that is!
• Anyone know what kind of shifter this is?
• I finally have my Hendrix Pro axles!!! Hendrix ???
• Fitting a compressor and air tank in the spare tire well...
• 315 too much rubber??
• A race car is born
• Help! Super Newbie here!
• anyone running a FAST 92MM intake manifold
• Looking for rear toe rods and trailing arms
• LS2 K&N CAI with lean codes
• Dual Mass Turd
• Going to make new Motor Mounts Have Q's
• Gforce Axles Review
• New Maggie Installed
• how much $ for pinion support bushing install through dealer
• Steel braided brake hoses back in stock
• LS2 ported throttle body
• Check Ebay for exhausts quick!
• What basic mods won't void the warranty?
• Dyno baseline for nearly stock '05 V
• 04 ctsv vs 08 vette ls3 auto
• Suspension improvements? (Pedders)
• Half Shafts...
• Gotta go back to stock springs with air bags
• New mods and dyno sheet.
• What's the best hand held tuner for a 2006-2007?
• PAH!! Bolt on 80HP of Awsomeness!!
• Baselining the V - a visit to the strip
• Looking for headers (kooks) install walkthrough
• PS2s to Hankooks
• Gforce axle testing conclusions
• Where can I find a Maggie LS6 Valley cover ASAP??
• Monster Clutch Stage 2.5 with 15lb Flywheel Review
• Easy guide to installing UUC shifter from the top
• GC Question
• About to order B&B headers and exhaust!!
• My newst toy for the V :)
• New maggie headed my way via Hendrix Engineering
• Pre-Cat Cutouts
• auto-x on 275/40 rear tires
• World's Fastest CTS-V in Standing 1-Mile
• Yet another Tire Question
• Time to rant, screw big oil and/or their retailers
• New numbers after dyno tune
• E85?
• Want to lower my V
• Headers and cats on.....now a question
• Z06 or CTS V
• Who Wants an Off-Road Test Pipe That Will Still Pass Visual Inspection?
• Need part numbers for LS6 MAP sensor and IAT sensor for maggie.
• Which fuel pump with Ms. Maggie?
• what is part number of 05 V ECU?
• Specter Werkes Cradle Bushings ready to ship
• Borla Exhaust
• Gforce Engineering axles
• Lowered suspension feel - new owner
• Race Series or Performance series?
• Relatively new V owner seeking some advice
• Poly motor mounts sizzling
• TKS Fab Front and Rear Strut bars
• Too many diffs in stock
• Which cold air intake is the best? Ported TB??
• Hendrix-Engineering econo axle ready to ship!
• Lindsay 2 piece rotors (Trackday update)
• Help with shif linkage and clutch
• 102 mm maf
• Cam, Header install almost wrapped up
• Best NOS: Which kit and why
• Craig's List Cam\Head Package
• B&B and UUC installed.
• maggie+90mm TB.
• Aftermarket Exhausts
• My twin turbo 408 is almost done
• MSD products?
• Hendrix HEX Clutch Review
• Lowering Parts I don't need....maybe you do? z06 endlinks, lowering spacers
• I bet this is one reason why we have clunk! (Video)
• Dyno results - looking for feedback
• Photos of Creative Steel Ultra Mounts Transmission Mount Vs. UUC Transmission Mount
• Am I missing something?
• Hendrix econo axle installed....it works!
• Everything I ever wanted to know about a Maggie,,,and your gonna tell me!!!
• Hendrix Clutch Review
• FINALLY!! I can blow up rears on DEMAND!!
• Brake Job - new rotors help
• Installing B&B headers and catback in 2 weeks!!
• Maggied 05, fuel rail cover questions
• @#$^!* UUC Transmission Mount
• Broke the Crank Pulley last night
• Who sells cradle bushing for our car?
• Need CAGS, who sells it?
• Have you guys heard of these brakes??
• B&M short throw shifter??
• Fuel Pump Change?
• LS7 Throttle Body
• B&B resonator
• I broke the crankcase return nipple on the intake manifold...
• Question on a FAST INTAKE????
• Engine Idle Question
• Monster Clutch Install
• Houston/Tomball TX CTS-Vs
• Just Completed Our 2006 LS2 CTS-V Dyno Tune...Dyno Sheet Here!!!
• Maggie group buy
• **rlj5 runs 11.64**
• Yet another cam question
• DYNO Runs - Thread
• Hendrix Econo-Axle Review
• I give up.
• Cquence rotors...
• Ultra Mounts Poly Motor Mounts from MotorMounts Full Review
• More Maggie info....please help.
• Diagnosis Needed
• Now I know why they call it the fastest color....
• Headers and exhaust or JUST exhaust?
• 1 7/8th vs 1 3/4" headers
• Will no cats cause any problems??
• Ls2 90mm on a Ls6?
• Kooks question.... again.
• A bit confused about "tuning"...help needed!
• WTB Stock Motor & Trans Mounts
• Braille Battery Install
• Nitrous Oxide....way better than cags!
• Hendrix Econo-Axle In Hand *Pics*
• Not impressed with KARS III...so far.
• UUC Motor Mounts Version 2
• Looking to stop wheel hop need help!!!
• Surprising Weight Savings from Aftermarket Wheels
• Wheel-hop eliminated/no upgraded axles
• anyone know how to contact voodoo performance for rear suspension
• 1 7/8 kooks Installed :D
• Anyone have a Procharged V?
• •• KW Coil Over Setup ••
• CTS-VR Intake
• Specter Werkes Cradle Bushings 04/05
• anyone running the K-sport coilovers ?
• Hendrix econo axle hand delievered
• 275/40 RE-11 on stock rim?
• Hendrix Engineering = QUALITY clutch/flywheel combo
• Picked up a (damaged) 05 V for less $20K with 13K miles, fixed it and WHOO HOO!
• CAGS! Eliminator. The best mod EVER!!!
• Oh No My Clutch!
• Kooks with stock exhaust?

vBulletin Copyright ©2000 - 2009, Jelsoft Enterprises Limited.
vB Easy Archive Final ©2000 - 2009 - Created by Stefan "Xenon" Kaeser