Cadillac Owners Forum banner

HVAC Module Location

4K views 1 reply 2 participants last post by  Rsteph 
#1 ·
Hey All,

I've purchased PAC NU-GM51 to unlock video in motion for CUE. Currently I am trying to install it but I am stuck with the following step:

When installing the NU-GM51 into the ATS or the CTS Sedan or XTS it will require you do disconnect the HVAC module. This is a
small black module with 4 connectors found in the passenger kick panel. Please be sure the vehicle is off when disconnecting
this module and make sure that when reconnecting, the Brown connector is connected LAST. Failure to connect the Brown
connector last will trigger a DTC and put the A/C into limp mode. A trip to the dealership to have it reset will be needed in the
event these instructions are not followed.
I do not understand where the HVAC model is located in the car exactly since I am not sure what the "Passenger Kick Panel" is.

I would appreciate it if someone can point me at the right direction, Thanks...
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top