D3 Tuned Cadillac XLR-V

Dr. Design · #1 (**permalink**) 04-09-09, 08:14 PM

Here are a few images of 09 XLR-V that was recently built for a customer. Modifications are as follows:

D3 Stage 1 & 2 Intake System
Blueprinted Intercooler
Upgraded Intercooler System
Intercooler Fluid Reservior
Upgraded Sway Bars
Lowered
D3 Stainless Steel Headers
Corsa Exhaust System
3-Piece Forgeline Wheels
Toyo Tires 255/35/20 & 285/30/20 T1R's
Removed Top Speed Limiter
D3 Spark Plugs
ECU Tune
6-piston & 4 piston brake upgrade

Stock Images

Completed Images

Please let us know if there are any questions. Dyno footage to follow....

Thank you,

Dr. Design
D3 Cadillac

whisler151 · #2 (**permalink**) 04-10-09, 11:04 AM

That looks amazing! Cant wait to see and hear the video.

hardxtimes13 · #3 (**permalink**) 04-15-09, 02:50 PM

sick man!!!

deadringer · #4 (**permalink**) 04-15-09, 03:11 PM

What ever happened to the dyno chart and the video footage?

Dr. Design · #5 (**permalink**) 04-21-09, 10:54 PM

The dyno chart needs to just be posted. The video is still waiting for editing/marketing. They are a bit behind, but should have it done soon.

Thank you,

Dr. Design
D3 Cadillac

Quote:

Originally Posted by deadringer

What ever happened to the dyno chart and the video footage?

Dr. Design · #6 (**permalink**) 04-23-09, 06:49 PM

Sorry for the delay. Here is the video and dyno footage. Please let us know if there are any questions.

Thank you,

Dr. Design
D3 Cadillac

deadringer · #7 (**permalink**) 04-24-09, 02:04 AM

I'm a bit confused... this chart is showing two graphs - what is the difference between the two? And also - it says "fly wheel" - doesn't the dyno show rear-wheel #'s? are these estimations?

Quote:

Originally Posted by Dr. Design

Sorry for the delay. Here is the video and dyno footage. Please let us know if there are any questions.

Thank you,

Dr. Design
D3 Cadillac

Dr. Design · #8 (**permalink**) 04-24-09, 02:54 PM

Sorry for the confusion. The graph shows wheel HP as it is measured at the wheels. The chart says flywheel as a default. There is a technical reason for this, but I honestly don't remember.

The lower numbers you see posted on the sheet are the initial numbers from previous runs before everything was dialed in. That was the only sheet I had at the time....

Let us know if there are any questions.
Thank you,

Dr. Design
D3 Cadillac