Cadillac Tech Tips - How to fix it Discussion, Disconnecting A/C sensors to stop "Low Refrigerant Level" from flashing??? in Item Specific Cadillac Discussion; If someone says this question was already answered in other threads, I apologize. I didn't search the entire site and ...
- 12-09-10 11:14 AM #1
Disconnecting A/C sensors to stop "Low Refrigerant Level" from flashing???
If someone says this question was already answered in other threads, I apologize. I didn't search the entire site and every topic's threads. It's a technical question and therefore I searched the technical section. Only found 7 threads after searching for "Air Conditioning".
Here is my question. It's really quite simple...
Is there something I can unplug or a wire I can ground out in order to stop "Low Refrigerant Level... A/C Compressor Disabled" from always flashing across my dash? It's very annoying, and I already know it!
I just happen to have a 93 Seville, and 93 was the last year of R-12. So I can't recharge my system unless I happen to find someone with some R-12 laying around. I heard converting to R-134 is a big hassle and pretty expensive, yet my brother said he knows someone that has done it to all his cars by simply flushing the system completely and refilling the R-12 with R-134 and hasn't had any issues yet (and he's an ASE-certified mechanic in his 60's!).
I don't really care about having A/C right now during the winter anyway. I just want that message to stop coming up. Any advice would sure be appreciated. Thanks.
+ Reply to Thread
Gear in this thread - Powered by O'Reilly Auto Parts
- PowerTorque Tools - Stubby Hex Bits Socket Set
Stubby Hex Bits Socket Set - 9 Piece; 1/4" & 3/8" Drive; SAE Stubby Hex Bit Socket Set; Contains: 1/4" Drive: 1/4", 5/16" & 3/8", 3/8" Drive: 7/16", 1/2", 9/16", 5/8", 11/16" & 3/4"
- PowerTorque Tools - Ratchet Handle & Socket Set
Ratchet Handle & Socket Set - 14 Piece; 1/4" Drive Ratchet Handle & Metric Socket Set
- PowerTorque Tools - SAE & Metric Socket Set
SAE & Metric Socket Set - 41 Piece; 1/4" & 3/8" Drive