Programming a FOB yourself ?

freshchops · #1 (**permalink**) 08-26-09, 03:39 AM

Of all the research I've done, I seen reference to the ability to (re)program FOB's to a new vehicle w/o a dealer. I've also read that it does have to be done by the dealer. I haven't seen instructions, the owners manual doesn't outline this, so I was curious, is it really possible to re-program them yourselves? and, if so, is there details online?

I'm programming an original '05 STS FOB to an '06 STS.... which appear to be identical.

Thanks!

Indyblue98 · #2 (**permalink**) 08-26-09, 09:04 AM

On the 2007 the instructions are in the owners manual. It can be done without a dealer.
Can't recall all the details but basic steps include putting the new remote in a holder inside the console, using the key in the drivers door lock , several turns to one side , and the display on the dash will say ready for FOB #1 .

There are more steps i cant remember, also a time limit.

But i can be done... 2007 at least .

ewill3rd · #3 (**permalink**) 08-26-09, 09:10 AM

I would have to look it up but yes you can program remotes "without the dealer".
You need your transmitters and a key that will turn the door lock.

Without knowing the specifics I know you cycle the key 5 times and it will put the vehicle in programming mode and you use the pocket in the console to identify transmitters and follow commands on the DIC.